Help With Full Span Aileron Rates

Post Reply
Ryan73
Posts: 2
Joined: Wed Aug 05, 2020 2:12 am
Country: -

Help With Full Span Aileron Rates

Post by Ryan73 »

I have a new Eflite Timber X 1.2. I have installed a 7 channel receiver and have everything working except I can't seem to get the dual rates to work on the flaps when they are linked to the ailerons as full length ailerons. Dual rates and expo works on all other surfaces. Anyone done this setup before that can give me some guidance?

Thanks!

Sent from my SM-N970U using Tapatalk


rdeanchurch
Posts: 750
Joined: Tue Dec 27, 2011 11:22 pm
Country: United States
Location: Carson City, Nv

Re: Help With Full Span Aileron Rates

Post by rdeanchurch »

Chances are you are using Ail sticks as in your flap mix, use the ail channel instead.
But there are other possibilities.
For best chance of getting help, post your .otx of the model.
Dean
OldDmbThms: 1. Takeoff, 2. Crash, 3. Repair, GOTO 1
pmullen503
Posts: 275
Joined: Sun May 06, 2012 8:37 pm
Country: -
Location: Fond du Lac, WI

Re: Help With Full Span Aileron Rates

Post by pmullen503 »

Do you have a switch to go from flaps+ ailerons to full span ailerons or are they full span ailerons all the time?
Ryan73
Posts: 2
Joined: Wed Aug 05, 2020 2:12 am
Country: -

Re: Help With Full Span Aileron Rates

Post by Ryan73 »

I'll upload the file when I get a chance. I've got it almost figured out.

There are flaps and ailerons. Set up to be full Span ailerons except when the flaps are deployed.

Sent from my SM-N970U using Tapatalk


Post Reply

Return to “openTx for FrSky radios”