Throttle not 100%
Throttle not 100%
Why aren't my throttles at -100 and 100 on my taranis? On each model they are different, this model here is -59 and +59 and another model they are -70 and +70. As you can see from input and mixer they are all at 100%? Also, if I am flying mode 2 on my transmitter why is the throttle showing on channel 1 and not channel 3 like it is really assigned. On channel monitor is shows it correctly but on the input and mixer they are assigned to channel 1. I guess this is normal.
- Attachments
-
-
-
-
Re: Throttle not 100%
Mode and channel order are completely different things, nothing says that when you fly mode 2 throttle should be 3, channel order is manufacturer preference.
So move things around in the mixer the way you want them, and set the default channel order in settings so that new models get created with the order you want.
About the percentage, seems your throttle stick/gimbal may be faulty or have a bad connection.
So move things around in the mixer the way you want them, and set the default channel order in settings so that new models get created with the order you want.
About the percentage, seems your throttle stick/gimbal may be faulty or have a bad connection.
Re: Throttle not 100%
I think I figured it out, my transmitter wasn't set to mode2 in the settings.