Need some help finding what the individual LED replacement light or lights are.
I have a VIZIO 50" E50X-E1 TV which I purchased back in 2017.
The display screen developed a dark area in the left upper area and after a few hours the whole screen went Black.
It still has sound and when shining a strong light on the screen can still see the proper images behind the screen.
So as I understand this symptom most of the time, this indicates that the LED Back-Lights have failed.
I disassembled the TV to the LED Back-Light Strips and checked each LED light,
discovering 6 of the 72 LED Lights are failing to work.
I would like to replace all the LED lights individually if cost is much less then purchasing the LED Strips.
I have not been able to find what these individual LED lights are.
If possible, does anyone know what these individual LED Lights are and/or where they may be purchased ?
Below is some more info and part numbers on the LED Back-Light Strips which may be of a help.
The 72 LED Lights are divided into 12 strips and one of the strips has two lights out and 5 other strips have one lights out (6 lights total have failed).
The LED Strips part number: LB50068 V0_00
and other numbers on each strip are:
KS-D 94V-0 81010
E465853
210BZ06D04336DL00L
73610008124
4D6640002EA0
Some other numbers on label inside back of Vizio 50" E50X-E1 TV:
TPT500U1-QVN03.U
LVA500QVN03AH12X0X
750TBV500350H8N000
B500QVN03AH12LECAAY79D6538
TBV500350H8X00U20CX
Replacing the LED Lights in a VIZIO TV
- bob195558
- Posts: 2340
- Joined: Sun Dec 16, 2012 7:24 pm
- Country: United States
- Location: New England, Vermont
- Contact:
Replacing the LED Lights in a VIZIO TV
Last edited by bob195558 on Wed Dec 15, 2021 4:11 pm, edited 1 time in total.
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
- bob195558
- Posts: 2340
- Joined: Sun Dec 16, 2012 7:24 pm
- Country: United States
- Location: New England, Vermont
- Contact:
Re: Replacing VIZIO TV LED Lights, (help)
Update:
I was not able to find/determine what the 72 individually LED lights are.
So I ordered 12 new LB50068 LED Backlight Strips, at a cost of about $70.00 from ShopJimmy.com.
I was not able to find/determine what the 72 individually LED lights are.
So I ordered 12 new LB50068 LED Backlight Strips, at a cost of about $70.00 from ShopJimmy.com.
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
- bob195558
- Posts: 2340
- Joined: Sun Dec 16, 2012 7:24 pm
- Country: United States
- Location: New England, Vermont
- Contact:
Re: Replacing the LED Lights in a VIZIO TV
Update and Results:
Received the new LED strips yesterday and reassembled the TV.
This fixed the trouble it had, now working great !
Received the new LED strips yesterday and reassembled the TV.
This fixed the trouble it had, now working great !
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).