Aiuto settaggio turnigy 9x

The original alternative firmware. Suitable for all 9x based radio control transmitters.
Post Reply
nino65
Posts: 6
Joined: Mon Jul 09, 2018 6:56 pm
Country: Italy

Aiuto settaggio turnigy 9x

Post by nino65 »

Un saluto a tutti
Desideravo sapere l'ultima versione che posso installare nella mia radio.
Attualmente ho installato opentx-9x versione 2.1.9 EEPR 216-3
Volevo attivare le 3 modalità di volo con ID0, ID1, ID2
Dove sbaglio ho settato al canale 5
CH5 MAX -100 IDE0
+= MAX 0 IDE1
+= MAX 100 IDE2
è giusto o sbagliato?
Quando vado su Betaflight Configurator è imposto le modalità di volo non ho niente su AUX 1,2,3,4
La ricevente montata è FRsky D8R-plus2 Trasmettitore montato nella turnigy 9x FRsky DJT
Qualcuno mi può aiutare?

nino65
Posts: 6
Joined: Mon Jul 09, 2018 6:56 pm
Country: Italy

Re: Aiuto settaggio turnigy 9x

Post by nino65 »

Hello everybody
I wanted to know the latest version I can install on my radio.
Currently I have installed opentx-9x version 2.1.9 EEPR 216-3
I wanted to activate the 3 flight modes with ID0, ID1, ID2
Where I'm wrong I set up at channel 5
CH5 MAX -100 IDE0
+ = MAX 0 IDE1
+ = MAX 100 IDE2
is it right or wrong?
When I go on Betaflight Configurator is imposed on the flight modes I have nothing on AUX 1,2,3,4
The mounted receiver is FRsky D8R-plus2 Transmitter mounted on the 9x FRsky DJT turnigy
Can anyone help me?
User avatar
MikeB
9x Developer
Posts: 17990
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: Aiuto settaggio turnigy 9x

Post by MikeB »

You have the ADD (+=) multiplex, you need the REPLACE multiplex on the 2nd and 3rd mix lines.

Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!

Post Reply

Return to “th9x”