Internal Bt not working after 2.3.3 Till 2.3.9

Hardware help and support for the FrSky Horus. (not yet released)
Post Reply
Bayreuther
Posts: 8
Joined: Fri May 01, 2020 4:12 am
Country: -

Internal Bt not working after 2.3.3 Till 2.3.9

Post by Bayreuther »

With 2.3.7 and 2.3.9 im not able to Trace Telemetry Data out over the internal Bt Mirror. HM-10 connected with 119200baud over AT Commands
In Model menue the Mac of my HM-10 is there.
Some thing came out of the HM-10. But not the Telemetry i expect.
If connect to Android App Telemetry Viewer. There is the right Data Till it disconnected after 30 seconds.

Can this be related to the Firmware on that HM-10?
It's V620
Does anyone know some thing about GATT Services and GATT Characters?
I THINK THE HM-10Connects to the wrong BTLE Service. And 0xFFF6 will be the right for Telemetry Data. But I dont know how to bind the HM-10 to that exact one.

stefanAC
Posts: 7
Joined: Mon Mar 20, 2017 2:54 pm
Country: -

Re: Internal Bt not working after 2.3.3 Till 2.3.9

Post by stefanAC »

try:
AT+CHAR0xFFF6
in AT mod, this works with my HM-10
stefanAC
Posts: 7
Joined: Mon Mar 20, 2017 2:54 pm
Country: -

Re: Internal Bt not working after 2.3.3 Till 2.3.9

Post by stefanAC »


Post Reply

Return to “FRSky Horus radio”