Horus x10Express 2.3.7 RF Bug?

Hardware help and support for the FrSky Horus. (not yet released)
Post Reply
User avatar
youngstar
Posts: 32
Joined: Wed May 06, 2020 1:37 pm
Country: United Kingdom

Horus x10Express 2.3.7 RF Bug?

Post by youngstar »

Not sure if software or hardware bug.
Horus Telemetry reading RX values ok such as RSSi, Battery etc.
However, returning to the wigdet screen after selecting relevant widgets for above telemetry values the horus displays bars with 50% values for RSSI and Battery bar values. The actual battery widget shows 0% and 0.0V. Tried everything but perhaps I am missing something.
Setup:
open TX 2.3.7 ISRM-S-X10E 1.1.0/2.1.0EU ie all updated. Receivers tried X4R in D16 (flashed accordingly to ACCST D16 v2.1.0 )
Access RX4R (flashed Firmware Version: v1.1.3.)
As stated no problems with receivers transmitting telemetry.

User avatar
Kilrah
Posts: 11108
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: Horus x10Express 2.3.7 RF Bug?

Post by Kilrah »

Bars meant you selected the first "Gauge" widget instead of scrolling to the "Value" one.
User avatar
youngstar
Posts: 32
Joined: Wed May 06, 2020 1:37 pm
Country: United Kingdom

Re: Horus x10Express 2.3.7 RF Bug?

Post by youngstar »

Thanks you for the prompt reply.
I understand your thinking makes sence for the incorret 50% value but the correct values were chosen each and every time.
Unless the radio isnt picking up the chosen widget value and displaying as you say other function. If that is the case I have no idea how to make the radio pick up the correct value.
User avatar
youngstar
Posts: 32
Joined: Wed May 06, 2020 1:37 pm
Country: United Kingdom

Re: Horus x10Express 2.3.7 RF Bug?

Post by youngstar »

Hi, many thanks you actually meant the term 'value' and not as I was interpreting as an expression!
All working now.
:lol:

Post Reply

Return to “FRSky Horus radio”