I've got a Horus X10 (not ACCESS) on OTX 2.3.4
When I try to use the internal module (telemetry enabled to X8R Pro) and the external module with R9M (telemetry disabled to R9MM) together to give a redundant 2.4GHz /900MHz radio link, it all binds fine, but intermittently all servo movement stops.
Channel monitors move normally with stick inputs, telemetry remains connected & the green lights on all the receivers stay lit. There's just no movement from any servo on any channel for a few seconds, then servos will start moving again.
I've seen people on Youtube with this combination working fine, but mine's not having it at all. Anything I'm missing?
Horus X10 Internal Module & External R9M
-
- Posts: 1
- Joined: Sat Jan 11, 2020 9:36 am
- Country: -
Re: Horus X10 Internal Module & External R9M
There's a bug in all 2.3 versions with that combination. It was first reported yesterday and is being worked on.
Re: Horus X10 Internal Module & External R9M
2.3.5 is now released with the fix for this.