ErskyTx on X20

erskyTx runs on many radios and upgrade boards
ersky9x was a port of er9x for use on the sky9x board.
User avatar
jurajjurej
Posts: 61
Joined: Mon May 23, 2022 6:32 am
Country: Slovakia

Re: ErskyTx on X20

Post by jurajjurej »

MikeB wrote: Thu Jun 09, 2022 2:32 pm Have you tried SDtest8 with the original SD card?
The screenshot takes several seconds to write to the SD card, and the screen image has to be fixed while that is done.

I'm looking to see why the audio is not sounding.

Mike
Not. Screenshots are now with the new faster card. I tried SDtest7 with the original SD card (16GB Patriot), but it didn't work well.
https://www.yasky.eu/detail/PATRIOT-16G ... 52?zoneId=

User avatar
MikeB
9x Developer
Posts: 17990
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: ErskyTx on X20

Post by MikeB »

I posted a SDtest8 with a longer timeout. It would be useful to know if this works with the original SD card.

Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
User avatar
jurajjurej
Posts: 61
Joined: Mon May 23, 2022 6:32 am
Country: Slovakia

Re: ErskyTx on X20

Post by jurajjurej »

MikeB wrote: Thu Jun 09, 2022 8:29 pm I posted a SDtest8 with a longer timeout. It would be useful to know if this works with the original SD card.

Mike
I will test when more changes (corrections) are made. (sound fix) I don't want to keep swapping the SD card in Tx and messing up the SD reader. I've done it at least 20 times.
Or is it necessary?
User avatar
MikeB
9x Developer
Posts: 17990
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: ErskyTx on X20

Post by MikeB »

I've posted a new test version (T9) for audio. In the STATISTICS area there is a new menu "AUDIO TEST". There are two tests t try (1 and 2). With the menu displayed, press the ENTER button to allow selection of each test with the rotary encoder, then press the ENTER button to run the test(s).
Hopefully, at least one of the tests will sound a tone for a second. These tests do not rely on the SD card or the volume setting, but do test for a "mute" output signal.
Please let me know if either (or both!) tests play a tone.
If neither plays a tone, then please let me know the values displayed on the lower part of this menu.

This test version also has a long timeout on SD writes.

Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
User avatar
jurajjurej
Posts: 61
Joined: Mon May 23, 2022 6:32 am
Country: Slovakia

Re: ErskyTx on X20

Post by jurajjurej »

"SDtest9"
....................................................
I inserted the original SD card (class 10).
Set Switch Screenshot. (rough choice)
Screenshot works.
Audio Test2 plays the tone.
Audio Test1 is silent.
Attachments
screen-2022-06-12-164421.png
screen-2022-06-12-164421.png (11.44 KiB) Viewed 47942 times
screen-2022-06-12-164035.png
screen-2022-06-12-164035.png (11.48 KiB) Viewed 47942 times
screen-2022-06-12-163759.png
screen-2022-06-12-163759.png (20.77 KiB) Viewed 47942 times
screen-2022-06-12-163629.png
screen-2022-06-12-163629.png (20.77 KiB) Viewed 47942 times
screen-2022-06-12-163358.png
screen-2022-06-12-163358.png (10.7 KiB) Viewed 47942 times
screen-2022-06-12-163339.png
screen-2022-06-12-163339.png (9.3 KiB) Viewed 47942 times
screen-2022-06-12-163319.png
screen-2022-06-12-163319.png (20.54 KiB) Viewed 47942 times
screen-2022-06-12-163311.png
screen-2022-06-12-163311.png (11.37 KiB) Viewed 47942 times
screen-2022-06-12-163258.png
screen-2022-06-12-163258.png (11.43 KiB) Viewed 47942 times
screen-2022-06-12-163245.png
screen-2022-06-12-163245.png (15.52 KiB) Viewed 47942 times
screen-2022-06-12-163151.png
screen-2022-06-12-163151.png (17.82 KiB) Viewed 47942 times

User avatar
jurajjurej
Posts: 61
Joined: Mon May 23, 2022 6:32 am
Country: Slovakia

Re: ErskyTx on X20

Post by jurajjurej »

Screenshot after test:
Audio Test2 plays the tone.
Audio Test1 is silent.
Attachments
screen-2022-06-12-171908.png
screen-2022-06-12-171908.png (6.92 KiB) Viewed 47937 times
screen-2022-06-12-171849.png
screen-2022-06-12-171849.png (7.14 KiB) Viewed 47937 times
User avatar
MikeB
9x Developer
Posts: 17990
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: ErskyTx on X20

Post by MikeB »

I've posted a new test version (AudioTest10) that drives the "mute" signal correctly (same as Audio Test 2). This should(!) play audio correctly.
With SDtest9 flashed, if you use "Audio Test 2", this should remove the mute signal, so audio should play after that until you power the radio off.

Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
User avatar
jurajjurej
Posts: 61
Joined: Mon May 23, 2022 6:32 am
Country: Slovakia

Re: ErskyTx on X20

Post by jurajjurej »

MikeB wrote: Sun Jun 12, 2022 9:44 pm I've posted a new test version (AudioTest10) that drives the "mute" signal correctly (same as Audio Test 2). This should(!) play audio correctly.
With SDtest9 flashed, if you use "Audio Test 2", this should remove the mute signal, so audio should play after that until you power the radio off.

Mike
It works as you describe.
Voice file selection does not work. (cannot be entered, can be played)
User avatar
MikeB
9x Developer
Posts: 17990
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: ErskyTx on X20

Post by MikeB »

A bit more detail on voice file selection please.
Which menu are you using to test this?
In the "Voice Alert" menu, when editing an alert, when you have a filename highlighted, a LONG press of ENTER should take you to a list of files. With a file highlighted, a SHORT press of ENTER should play the file, and a LONG press of ENTER should select the file and return to the alert menu with the selected filename now showing.
What happens with a short press and a long press of ENTER in the file list?

Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
User avatar
jurajjurej
Posts: 61
Joined: Mon May 23, 2022 6:32 am
Country: Slovakia

Re: ErskyTx on X20

Post by jurajjurej »

I use the Model Setup / VoiceAudio menu
Short press ENTER to play the file (OK)
A long press ENTER will return me to the voice file selection, but it will remain empty. (not selected)
It depends on the File Type.
.............................................................
Effect... OK
SysName........cannot be selected
Name......cannot be selected
GV/SC/...........OK
Attachments
screen-2022-06-13-185758.png
screen-2022-06-13-185758.png (12.96 KiB) Viewed 47863 times
screen-2022-06-13-190007.png
screen-2022-06-13-190007.png (17.48 KiB) Viewed 47864 times
Last edited by jurajjurej on Mon Jun 13, 2022 5:44 pm, edited 2 times in total.
User avatar
jurajjurej
Posts: 61
Joined: Mon May 23, 2022 6:32 am
Country: Slovakia

Re: ErskyTx on X20

Post by jurajjurej »

Model Setup/General/Voice File..................cannot be selected

Will the keyboard pop up with a short selection?
Attachments
screen-2022-06-13-185708.png
screen-2022-06-13-185708.png (22.83 KiB) Viewed 47865 times
User avatar
MikeB
9x Developer
Posts: 17990
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: ErskyTx on X20

Post by MikeB »

There is a control option where a LONG press of ENTER acts as EXIT (RTN button). This may be disabled in the "RADIO SETUP|General" menu ("No ENC. as EXIT"). Tick this box then a LONG press of ENTER will select the file.

I will fix it so a LONG press of ENTER always selects the file.

Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
User avatar
jurajjurej
Posts: 61
Joined: Mon May 23, 2022 6:32 am
Country: Slovakia

Re: ErskyTx on X20

Post by jurajjurej »

MikeB wrote: Mon Jun 13, 2022 6:03 pm There is a control option where a LONG press of ENTER acts as EXIT (RTN button). This may be disabled in the "RADIO SETUP|General" menu ("No ENC. as EXIT"). Tick this box then a LONG press of ENTER will select the file.

I will fix it so a LONG press of ENTER always selects the file.

Mike
Excellent. After checking the box. Voice file selection works OK.
User avatar
Narcis
Posts: 21
Joined: Wed Mar 02, 2022 1:52 pm
Country: Spain
Location: Barcelona

Re: ErskyTx on X20

Post by Narcis »

I tested Audiotest10.
It plays files but only after I run Audiotest2.
B72991C1-74B9-4497-847A-4F177A513E51.jpeg
(4.04 MiB) Not downloaded yet
User avatar
jurajjurej
Posts: 61
Joined: Mon May 23, 2022 6:32 am
Country: Slovakia

Re: ErskyTx on X20

Post by jurajjurej »

Narcis wrote: Mon Jun 13, 2022 8:47 pm I tested Audiotest10.
It plays files but only after I run Audiotest2.

B72991C1-74B9-4497-847A-4F177A513E51.jpeg
That is known.
It still needs to be fine-tuned and a new version released.
User avatar
MikeB
9x Developer
Posts: 17990
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: ErskyTx on X20

Post by MikeB »

AudioTest11 now posted. The audio should now play.
I've fixed the audio file selection problem, and added some touch buttons on the file list display.

Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
User avatar
Narcis
Posts: 21
Joined: Wed Mar 02, 2022 1:52 pm
Country: Spain
Location: Barcelona

Re: ErskyTx on X20

Post by Narcis »

The audio now always play.
Selection works fine with no ENC. as exit unselected.
Touch buttons in file list also works fine.

Narcis.
User avatar
jurajjurej
Posts: 61
Joined: Mon May 23, 2022 6:32 am
Country: Slovakia

Re: ErskyTx on X20

Post by jurajjurej »

So far, so good
leon20008
Posts: 3
Joined: Tue Apr 26, 2022 11:42 am
Country: -

Re: ErskyTx on X20

Post by leon20008 »

Hi Mike, please tell how do it enter telemetry with ELRS or Crossfire .
I look manual pdf but old information. If you have screen "step-by-step" example will be exelent for all users, thanks.
User avatar
MikeB
9x Developer
Posts: 17990
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: ErskyTx on X20

Post by MikeB »

I currently process most of what I know about Crossfire/ELRS telemetry, and store the values as named telemetry items. These (currently) use FrSky names. The mapping is as follows:

GPS altitude: Galt
GPS Course: Hdg
Tx Quality: TSSI
Rx Quality: RSSI
Other Link values in Cus1-Cus9 and Cs10
Pack voltage: FasV
Pack Current: Amps
Pack consumption: mAh
Attitude: Accx,Accy,Accz
GPS Lat and Long are stored but not displayable, though they may be logged.

I don't have any Crossfire hardware, and only limited ELRS hardware (1 Tx module and one, small Rx), so testing is difficult.
If you have some other telemetry values that should be present, let me know what they are and I'll see if I can find how to process them.

Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
User avatar
MikeB
9x Developer
Posts: 17990
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: ErskyTx on X20

Post by MikeB »

I've posted r12. This has the fixes in for audio and SD card writing.
I've also added use of the internal RF module in ACCESS and ACCST (2.4GHz only) modes (not TD yet). As far as I can tell, there may be two versions of the radio hardware, and they may use different processor outputs to enable power to the internal module. This version uses one of these signals and works on my (pre-production) X20.
A simple test is to enable the internal module, in ACCESS mode, then select the "Hardware" item in the menu. If the module is powered OK, then you should see the hardware and software revisions and the module type displayed.

Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
User avatar
Narcis
Posts: 21
Joined: Wed Mar 02, 2022 1:52 pm
Country: Spain
Location: Barcelona

Re: ErskyTx on X20

Post by Narcis »

I’ve tested r12 with and R8PRO (2.4Ghz)
It was registered, binded and works fine.

I tried with and R9SX (868 MHz.) but I was not able to register.

Narcis.
User avatar
MikeB
9x Developer
Posts: 17990
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: ErskyTx on X20

Post by MikeB »

As I mentioned in the comment under the r12 version, I haven't got the 868/915 MHz working yet, just 2.4GHz on the internal module. I'll edit the above post to mention that there as well.

Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
User avatar
jurajjurej
Posts: 61
Joined: Mon May 23, 2022 6:32 am
Country: Slovakia

Re: ErskyTx on X20

Post by jurajjurej »

Nothing to me.

screen-2022-06-21-114343.png
screen-2022-06-21-114343.png (8.48 KiB) Viewed 47534 times
screen-2022-06-21-114315.png
screen-2022-06-21-114315.png (8.32 KiB) Viewed 47534 times
User avatar
MikeB
9x Developer
Posts: 17990
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: ErskyTx on X20

Post by MikeB »

Not sure what you mean. With "Internal" highlighted press ENTER or touch the "Select" icon. You should then get the protocol menu displayed.

Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
User avatar
jurajjurej
Posts: 61
Joined: Mon May 23, 2022 6:32 am
Country: Slovakia

Re: ErskyTx on X20

Post by jurajjurej »

A simple test is to enable the internal module, in ACCESS mode, then select the "Hardware" item in the menu. If the module is powered OK, then you should see the hardware and software revisions and the module type displayed.

Mike


I thought a revision would appear under "Hardware".
Yes is displayed after selecting protocol/internal/Access / select.
User avatar
jurajjurej
Posts: 61
Joined: Mon May 23, 2022 6:32 am
Country: Slovakia

Re: ErskyTx on X20

Post by jurajjurej »

For me like this:
screen-2022-06-22-184027.png
screen-2022-06-22-184027.png (16.96 KiB) Viewed 47472 times
User avatar
MikeB
9x Developer
Posts: 17990
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: ErskyTx on X20

Post by MikeB »

The module revisions are only displayed if you ask for them by highlighting the "Hardware" item then pressing ENTER.

Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
User avatar
jurajjurej
Posts: 61
Joined: Mon May 23, 2022 6:32 am
Country: Slovakia

Re: ErskyTx on X20

Post by jurajjurej »

MikeB wrote: Thu Jun 23, 2022 10:39 pm The module revisions are only displayed if you ask for them by highlighting the "Hardware" item then pressing ENTER.

Mike
OK. Sometimes the problem is a bit with the conversation. English is not my mother tongue.
User avatar
jurajjurej
Posts: 61
Joined: Mon May 23, 2022 6:32 am
Country: Slovakia

Re: ErskyTx on X20

Post by jurajjurej »

Is something new waiting for us? New version?

Post Reply

Return to “erskyTx (was ersky9x)”