"Trainer Connection Lost" error while not using trainer
-
- Posts: 213
- Joined: Tue Jun 16, 2015 2:05 am
- Country: United States
- Location: durham, nc
"Trainer Connection Lost" error while not using trainer
I have an x7 running ERSKYTx (*have to get used to the new name) -222, I think.
I've not changed anything in the last 6 months other than mixer settings.
Yesterday while flying one of my models, my x7 decided to begin announcing "training connection lost", non stop; it was hard to concentrate on flying!
I have never used this radio for a trainer connection, and never had this issue with this radio.
My radio setup has trainer set to "slave" and this model's settings are basically the same as every other model in there (including having trainer set to "off" in protocol). I have only flown helis with this radio and they are all set up the same using xsr receivers and brain gyros
Why is my radio barking about trainer connection, and how do I make it stop.
I've provided the info I thought you would need to help me, please ask me for whatever info you need to do so.
Thanks!
I've not changed anything in the last 6 months other than mixer settings.
Yesterday while flying one of my models, my x7 decided to begin announcing "training connection lost", non stop; it was hard to concentrate on flying!
I have never used this radio for a trainer connection, and never had this issue with this radio.
My radio setup has trainer set to "slave" and this model's settings are basically the same as every other model in there (including having trainer set to "off" in protocol). I have only flown helis with this radio and they are all set up the same using xsr receivers and brain gyros
Why is my radio barking about trainer connection, and how do I make it stop.
I've provided the info I thought you would need to help me, please ask me for whatever info you need to do so.
Thanks!
-
- Posts: 750
- Joined: Tue Dec 27, 2011 11:22 pm
- Country: United States
- Location: Carson City, Nv
Re: "Trainer Connection Lost" error while not using trainer
Why is the model set to 'Slave' if you are not using the radio as a student radio in a trainer setup'?
Set it to 'Master' and try.
Set it to 'Master' and try.
Dean
OldDmbThms: 1. Takeoff, 2. Crash, 3. Repair, GOTO 1
OldDmbThms: 1. Takeoff, 2. Crash, 3. Repair, GOTO 1
Re: "Trainer Connection Lost" error while not using trainer
It's the opposite, signal lost is only supposed to be played by a master that lost the student's signal, so having the radio set as slave is correct.
-
- Posts: 213
- Joined: Tue Jun 16, 2015 2:05 am
- Country: United States
- Location: durham, nc
Re: "Trainer Connection Lost" error while not using trainer
My tx, the one I'm flying with that is giving me the error is set to "slave" in the radio setup tab. I figured the slave only ever outputs signal; it's ignorant to the fact that it's involved in a trainer setup.
But, it only happens on 2 out of 7 of my models.
It just so happens that the 2nd of those two is a modified copy of the first.
I will try setting it to master and see what happens, but that won't be until this weekend. if you or anyone else have advice or ideas on what to try to fix it, please keep'm coming. if one doesn't work then I'll try another.
Thanks, again!
But, it only happens on 2 out of 7 of my models.
It just so happens that the 2nd of those two is a modified copy of the first.
I will try setting it to master and see what happens, but that won't be until this weekend. if you or anyone else have advice or ideas on what to try to fix it, please keep'm coming. if one doesn't work then I'll try another.
Thanks, again!
Re: "Trainer Connection Lost" error while not using trainer
Please download your models that give problems and post them here.. Or even better, the complete eeprom.
João
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
-
- Posts: 213
- Joined: Tue Jun 16, 2015 2:05 am
- Country: United States
- Location: durham, nc
Re: "Trainer Connection Lost" error while not using trainer
Let me make it more confusing: Logo480 is the modified copy of another model and it definitely gives trainer connection lost
Either 600ESP or 600E is the model that Logo480 was copied from and it's also one that is chirping about trainer connection. One of the 600's *does not whine about the trainer connection.
Thanks!
Either 600ESP or 600E is the model that Logo480 was copied from and it's also one that is chirping about trainer connection. One of the 600's *does not whine about the trainer connection.
Thanks!
- Attachments
-
- eeprom-2020-01-12.zip
- (3.26 KiB) Downloaded 296 times
-
- Models.eepe
- (68.14 KiB) Downloaded 282 times
Re: "Trainer Connection Lost" error while not using trainer
Do you have bluetooth installed in your radio?
João
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
-
- Posts: 213
- Joined: Tue Jun 16, 2015 2:05 am
- Country: United States
- Location: durham, nc
-
- Posts: 213
- Joined: Tue Jun 16, 2015 2:05 am
- Country: United States
- Location: durham, nc
Re: "Trainer Connection Lost" error while not using trainer
oddly enough, my haptic has also just stopped working.
I even double checked a model that I know had haptic on countdown and it isn't working.
I even double checked a model that I know had haptic on countdown and it isn't working.
-
- Posts: 213
- Joined: Tue Jun 16, 2015 2:05 am
- Country: United States
- Location: durham, nc
Re: "Trainer Connection Lost" error while not using trainer
It was driving me crazy, so I "fixed" it.
I moved the sound file TRN_LOST out of the system folder.
Like turning up the stereo in your car so you can't hear the power steering pump whine.
I'm going to reload the bootloader and update my er9x to see if that doesn't actually clear up the issue.
I moved the sound file TRN_LOST out of the system folder.
Like turning up the stereo in your car so you can't hear the power steering pump whine.
I'm going to reload the bootloader and update my er9x to see if that doesn't actually clear up the issue.