right FW ?

erskyTx runs on many radios and upgrade boards
ersky9x was a port of er9x for use on the sky9x board.
Post Reply
michel49
Posts: 192
Joined: Sun Oct 07, 2012 10:59 am
Country: -

right FW ?

Post by michel49 »

I'm not sure if I have the right FW on my TH9X/AR9X board: ersky9x-pe3r221; there is something strange: I have rudder and gaz trims reversed; except that all work fine

MP

User avatar
MikeB
9x Developer
Posts: 17990
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: right FW ?

Post by MikeB »

Do you mean rudder does throttle and throttle does rudder, or do you mean they move in the wrong direction?
If you go to the "DIAGSWTCH" menu (under "RADIO SETUP"), you may test the trim switches themselves are operating correctly.

Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
michel49
Posts: 192
Joined: Sun Oct 07, 2012 10:59 am
Country: -

Re: right FW ?

Post by michel49 »

Both rudder and throttle trims go in the wrong direction, as I can see on the screen; can you confirm the FW is the right one ?
Besides I discovered the connection with my PC don't work since it don't transfer the models but I get a "successful message" with eepe, as with my 9xrPRO.

Of course I can desolder the wires of the trims and reversed it...Except for that I can fly securely with this Tx...

MP
User avatar
MikeB
9x Developer
Posts: 17990
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: right FW ?

Post by MikeB »

The firmware is the correct one, the filename of the file you flashed should be "ersky9x_rom.bin".
On the main screen with the two boxes that show the stick positions, does the small circle for the left stick move in the correct direction (follow the stick movement)?
I have known the stick setting to be reversed, which would cause the trims to appear reversed.

Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
michel49
Posts: 192
Joined: Sun Oct 07, 2012 10:59 am
Country: -

Re: right FW ?

Post by michel49 »

Thanks Mike

Yes the stick movement is the right way and the trim is reversed, only for rudder and throttle; I don't discovered that immediately since I use rarely these trims..

MP

User avatar
jhsa
Posts: 19480
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: right FW ?

Post by jhsa »

Create a complete new model on your radio. (Do not skip this.step).

Horizontal sticks should be -100 fully left and +100 fully right.

Vertical sticks should be -100 fully down and +100 fully up.

Is this what you see??

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
User avatar
MikeB
9x Developer
Posts: 17990
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: right FW ?

Post by MikeB »

Please do as João asks. Also, in the DIAGSWTCH menu check the trim switch response.
The rudder trim should set the "+" when moved right and the "-" when moved left.
The throttle trim should set the "+" when moved up and the "-" when moved down.

Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
michel49
Posts: 192
Joined: Sun Oct 07, 2012 10:59 am
Country: -

Re: right FW ?

Post by michel49 »

Yes Joao, except for those two trims, all is OK; so I moved the wires and now that's all right

MP

Post Reply

Return to “erskyTx (was ersky9x)”