I'm not sure if I have the right FW on my TH9X/AR9X board: ersky9x-pe3r221; there is something strange: I have rudder and gaz trims reversed; except that all work fine
MP
right FW ?
- MikeB
- 9x Developer
- Posts: 17990
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: right FW ?
Do you mean rudder does throttle and throttle does rudder, or do you mean they move in the wrong direction?
If you go to the "DIAGSWTCH" menu (under "RADIO SETUP"), you may test the trim switches themselves are operating correctly.
Mike
If you go to the "DIAGSWTCH" menu (under "RADIO SETUP"), you may test the trim switches themselves are operating correctly.
Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: right FW ?
Both rudder and throttle trims go in the wrong direction, as I can see on the screen; can you confirm the FW is the right one ?
Besides I discovered the connection with my PC don't work since it don't transfer the models but I get a "successful message" with eepe, as with my 9xrPRO.
Of course I can desolder the wires of the trims and reversed it...Except for that I can fly securely with this Tx...
MP
Besides I discovered the connection with my PC don't work since it don't transfer the models but I get a "successful message" with eepe, as with my 9xrPRO.
Of course I can desolder the wires of the trims and reversed it...Except for that I can fly securely with this Tx...
MP
- MikeB
- 9x Developer
- Posts: 17990
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: right FW ?
The firmware is the correct one, the filename of the file you flashed should be "ersky9x_rom.bin".
On the main screen with the two boxes that show the stick positions, does the small circle for the left stick move in the correct direction (follow the stick movement)?
I have known the stick setting to be reversed, which would cause the trims to appear reversed.
Mike
On the main screen with the two boxes that show the stick positions, does the small circle for the left stick move in the correct direction (follow the stick movement)?
I have known the stick setting to be reversed, which would cause the trims to appear reversed.
Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: right FW ?
Thanks Mike
Yes the stick movement is the right way and the trim is reversed, only for rudder and throttle; I don't discovered that immediately since I use rarely these trims..
MP
Yes the stick movement is the right way and the trim is reversed, only for rudder and throttle; I don't discovered that immediately since I use rarely these trims..
MP
Re: right FW ?
Create a complete new model on your radio. (Do not skip this.step).
Horizontal sticks should be -100 fully left and +100 fully right.
Vertical sticks should be -100 fully down and +100 fully up.
Is this what you see??
João
Horizontal sticks should be -100 fully left and +100 fully right.
Vertical sticks should be -100 fully down and +100 fully up.
Is this what you see??
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
- MikeB
- 9x Developer
- Posts: 17990
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: right FW ?
Please do as João asks. Also, in the DIAGSWTCH menu check the trim switch response.
The rudder trim should set the "+" when moved right and the "-" when moved left.
The throttle trim should set the "+" when moved up and the "-" when moved down.
Mike
The rudder trim should set the "+" when moved right and the "-" when moved left.
The throttle trim should set the "+" when moved up and the "-" when moved down.
Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: right FW ?
Yes Joao, except for those two trims, all is OK; so I moved the wires and now that's all right
MP
MP