Hi Mike/Jao
i have a Turnigy 9xr pro with R 221 revb-x date 19-02-2018 binding with orange r615 receievers and with the whoop: Mobula 7 dsmx and with a
LDARC 1900 Drone with Lemon RX sattelite . Problem is that i cannot switch model and not lose the bind.
Can you tell me where i can "see" the bind and check if something is wrong, or s houd i update to another version (what version?),
Thanks.
Losing bind
Re: Losing bind
Binding is a module function but you did not say what module you were using.
Re: Losing bind
It is the Orange RX 2.4 GHz telemetrie Module for Turnigy (XR Pro
https://hobbyking.com/nl_nl/orangerx-2- ... tible.html
https://hobbyking.com/nl_nl/orangerx-2- ... tible.html
Re: Losing bind
There are 4 different DSM transmission modes. When you bind the module selects the proper one for the RX that you've bound. When you change to another receiver that requires a different type that module requires you to either manually switch between the modes using some pattern of pressing the bind button to reach the correct one or to rebind. Refer to module manual.
Re: Losing bind
Thank you Kilrah for your input
I think the mistake i made is not getting a new id on the module for every new receiver.
Problem solverd Thx
I think the mistake i made is not getting a new id on the module for every new receiver.
Problem solverd Thx
Re: Losing bind
No, you should never change the ID on the module unless you have a conflict with another user. Changing ID will require rebinding any receiver so it doesn't help you.