Sound Pack For OpenTX Stock Board With m64/m128 22Khz 16Bit

Sound packs for the new audio mods
Post Reply
User avatar
jhsa
Posts: 19480
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Sound Pack For OpenTX Stock Board With m64/m128 22Khz 16Bit

Post by jhsa »

Sound pack for open9x stock board with atmega 64 or 128. These files don't work with the emartee module. Only for New Sound Module (MegaSound9x), X9D, Sky9x, and probably Gruvin board.
For some boards you might have to create some system folders on the SD Card and put the files inside.
The sound pack is divided in two zip files due to the maximum file size allowed of 5Mb :(

João

EDIT: File numbering changed from Opentx version 2212
Files updated.
Attachments
Multirotor.zip
Some files for multirotors
(187.16 KiB) Downloaded 1112 times
OpenTX-English-Female_2.zip
Part 2
(4.65 MiB) Downloaded 1328 times
OpenTX-English-Female_1.zip
Part 1
(4.62 MiB) Downloaded 1389 times
Last edited by jhsa on Fri Apr 05, 2013 6:00 pm, edited 1 time in total.
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW

User avatar
jhsa
Posts: 19480
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: Sound Pack For Open9x Stock Board With m64/m128 22Khz 16

Post by jhsa »

Voice Package updated

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
User avatar
jhsa
Posts: 19480
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: Sound Pack For OpenTX Stock Board With m64/m128 22Khz 16

Post by jhsa »

There was a mistake on Part 2. Guys you will have to download it again or some files won't work. sorry about that

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
User avatar
jhsa
Posts: 19480
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: Sound Pack For OpenTX Stock Board With m64/m128 22Khz 16

Post by jhsa »

The Sound pack was updated.. Future releases of OpenTX require some changes to the file numbering.
these files won't work with older versions of OpenTX

João

For the ones wanting to know what changed here it is:

http://openrcforums.com/forum/viewtopic ... 863#p53863
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
User avatar
jhsa
Posts: 19480
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: Sound Pack For OpenTX Stock Board With m64/m128 22Khz 16

Post by jhsa »

some files for multirotors ;)
Attachments
Multirotor.zip
(187.16 KiB) Downloaded 715 times
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW

User avatar
LTMNO
Posts: 1049
Joined: Fri Nov 30, 2012 9:31 pm
Country: Canada
Location: Toronto, Canada

Re: Sound Pack For OpenTX Stock Board With m64/m128 22Khz 16

Post by LTMNO »

Thanks Joao, great help in doing this.
Custom 9x with M64/Telemetry Mod
User avatar
Flaps 30
Posts: 1490
Joined: Tue Dec 27, 2011 6:04 pm
Country: -
Location: Wokingham Berkshire

Re: Sound Pack For OpenTX Stock Board With m64/m128 22Khz 16

Post by Flaps 30 »

I have just installed version 2491 on one of my transmitters. It seems that there might be some changes made to the numbering of some files. Can anyone point me at the new pack to cover that or/and a list of changes made since version 2413..
User avatar
Kilrah
Posts: 11108
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: Sound Pack For OpenTX Stock Board With m64/m128 22Khz 16

Post by Kilrah »

User avatar
Flaps 30
Posts: 1490
Joined: Tue Dec 27, 2011 6:04 pm
Country: -
Location: Wokingham Berkshire

Re: Sound Pack For OpenTX Stock Board With m64/m128 22Khz 16

Post by Flaps 30 »

Ohh,... So it is.. :oops:

To save myself shed loads of work. Is there a change list, so that it would be possible just to alter or add files as necessary to the older pack? This would be of great benefit to those who have the Megasound board with the serial link, as it would reduce the number of files that would need to be transferred to the internal SD card.
User avatar
jhsa
Posts: 19480
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: Sound Pack For OpenTX Stock Board With m64/m128 22Khz 16

Post by jhsa »

Yes I did say it there.. But i guess we are all waiting for an update topic as it has always been done..
not everybody read every single post.. there are a very few of us that do it ;)

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
User avatar
Flaps 30
Posts: 1490
Joined: Tue Dec 27, 2011 6:04 pm
Country: -
Location: Wokingham Berkshire

Re: Sound Pack For OpenTX Stock Board With m64/m128 22Khz 16

Post by Flaps 30 »

So what file numbers are changed/added between version 2413 and version 2491? ... Obviously I could trudge through the lists to see which ones are changed. :)
User avatar
jhsa
Posts: 19480
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: Sound Pack For OpenTX Stock Board With m64/m128 22Khz 16

Post by jhsa »

Ok, here you go, Now go and say bad things about the thumb flyers again.. :twisted: :mrgreen:

After file 00425 you will find the ones that need changing. New file number is after the name. you will need to add zeros to the numbers :) I can't do everything :D Please note that there is a new file that must be created "Bad Eeprom" And one that must be deleted, "10 seconds" the reason is that the count down now starts at 10s so that file is not needed anymore..

I hope it helps..
AHH, And it is a CSV file as requested.. :twisted:
João
Attachments
english-english-stock_Changes.csv
(4.93 KiB) Downloaded 1040 times
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
User avatar
Flaps 30
Posts: 1490
Joined: Tue Dec 27, 2011 6:04 pm
Country: -
Location: Wokingham Berkshire

Re: Sound Pack For OpenTX Stock Board With m64/m128 22Khz 16

Post by Flaps 30 »

Thanks João. That helped short circuit a fair amount of work. :)

So for those with the serial SD update facility for the Megasound or those that just wish to replace/update the files needed to run with version 2491. The files to be taken from the new pack to overwrite/add to the old pack are as follows. 0480, 0481, 0482, 0483, 0485, 0486, 0495, 0500, 0501

Already working on the thumb flyers stuff. :twisted:
User avatar
jhsa
Posts: 19480
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: Sound Pack For OpenTX Stock Board With m64/m128 22Khz 16

Post by jhsa »

:mrgreen: :mrgreen:
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
User avatar
LTMNO
Posts: 1049
Joined: Fri Nov 30, 2012 9:31 pm
Country: Canada
Location: Toronto, Canada

Re: Sound Pack For OpenTX Stock Board With m64/m128 22Khz 16

Post by LTMNO »

Strange, after updating I no longer get welcome too. In your doc 00495 greeting and previous was 00501? is this true?
Attachments
0157.wav
Quadcopter
(59.58 KiB) Downloaded 5935 times
Custom 9x with M64/Telemetry Mod
User avatar
Flaps 30
Posts: 1490
Joined: Tue Dec 27, 2011 6:04 pm
Country: -
Location: Wokingham Berkshire

Re: Sound Pack For OpenTX Stock Board With m64/m128 22Khz 16

Post by Flaps 30 »

The welcome message was 0495 it is now 0480.

501 was the one that said "ten seconds" that is no longer used.

If you follow what was said in my previous post, then you will be good to go with the latest version of OpenTX .. The details of the changes are in jhsa's changes CSV file.
bertrand35
9x Developer
Posts: 2764
Joined: Fri Dec 30, 2011 11:11 pm
Country: -

Re: Sound Pack For OpenTX Stock Board With m64/m128 22Khz 16

Post by bertrand35 »

Sorry for the delay. openTX gives me too much work.
Here is the list:
http://openrcforums.com/forum/viewtopic ... 008#p54008
User avatar
LTMNO
Posts: 1049
Joined: Fri Nov 30, 2012 9:31 pm
Country: Canada
Location: Toronto, Canada

Re: Sound Pack For OpenTX Stock Board With m64/m128 22Khz 16

Post by LTMNO »

Thx. Much appreciated.

Here is the List updated with files found in Sound Pack.
Sound File Index.csv
Updated List
(5.32 KiB) Downloaded 724 times
The downloadable soundpack doesn't reflect -->

http://openrcforums.com/forum/viewtopic ... 008#p54008

So, that was the confusion. I will update the soundpack to reflect the changes.

Thanks.

EDIT: The strange thing is that with this update and the correction welcome message file on there 0480.wav that says weclome... i still get the 0482.wav being played on startup and not 0480.wav
Custom 9x with M64/Telemetry Mod

Post Reply

Return to “Sound Pack Library”