Totally lost:noob trying to setup opentx for SR heli

Post Reply
interestingfellow
Posts: 213
Joined: Tue Jun 16, 2015 2:05 am
Country: United States
Location: durham, nc

Totally lost:noob trying to setup opentx for SR heli

Post by interestingfellow »

I....I'm totally lost on wth I'm doing...I thought I could meander through open-txu.org, but it's totally not the same from the taranis to the 9x....

I have opentx running on a 9x and I'm trying to figure out how to setup a Blade SR (or any) heli with an ar6100e rx.
But I also don't know how to set up a heli anyway, besides the fact that I don't know jack about opentx programming.

I've looked through the wiki and the 9x manual, but i'm new and slow in the head.

Is there a plain walk through step by step kind of setup manual for the 9x and a basic 120 heli?

interestingfellow
Posts: 213
Joined: Tue Jun 16, 2015 2:05 am
Country: United States
Location: durham, nc

Re: Totally lost:noob trying to setup opentx for SR heli

Post by interestingfellow »

It can't be that easy.

I selected "06 heli setup" under "templates. Everything seems to be setup. TH and flight mode (acrobatic).
Now I have to figure out this BLheli stuff and make sure my ESC's arm and operate. Then, slap it all back together and try to fly!
Post Reply

Return to “Helicoptor Programming”