Futaba DM8 module with ER9X

Like DSM2/DSMX? Want to mod your radio to support it? Post your messages here!
Post Reply
cjapka
Posts: 9
Joined: Sun Sep 09, 2012 7:54 pm
Country: -

Futaba DM8 module with ER9X

Post by cjapka »

Dear guys,
anybody succesfully tried to mount FUTABA DM8 Module into ER9X? After success with MLP4dsm, i want to try this full range module...

It seems very easily, but I am not sure, if 3 wires (+, - , signal) is enough to run it...

Thanks for your answer!

Ondrej

User avatar
Rob Thomson
Site Admin
Posts: 4543
Joined: Tue Dec 27, 2011 11:34 am
Country: United Kingdom
Location: Albury, Guildford
Contact:

Re: Futaba DM8 module with ER9X

Post by Rob Thomson »

Yes. That should work. Only issue is securing the box effectively!


Sent from my Nexus 7 using Tapatalk 2
Slope Soaring, FPV, and pretty much anything 'high tech'
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
User avatar
cre8tiveleo
Posts: 1434
Joined: Tue Dec 27, 2011 6:13 pm
Country: -
Location: Ontario,(GTA North)
Contact:

Re: Futaba DM8 module with ER9X

Post by cre8tiveleo »

cjapka
Posts: 9
Joined: Sun Sep 09, 2012 7:54 pm
Country: -

Re: Futaba DM8 module with ER9X

Post by cjapka »

WOW!! this board seems perfect! Dont you know, if there is only Voltage stabiliser or other parts? Thanks!
cjapka
Posts: 9
Joined: Sun Sep 09, 2012 7:54 pm
Country: -

Re: Futaba DM8 module with ER9X

Post by cjapka »

Seems perfect! but ---out of stock:( and no more sources of this product on market:(

cjapka
Posts: 9
Joined: Sun Sep 09, 2012 7:54 pm
Country: -

Re: Futaba DM8 module with ER9X

Post by cjapka »

In stooock! Hooorray!!
Alekseygo
Posts: 12
Joined: Fri Apr 06, 2012 10:07 pm
Country: -

Re: Futaba DM8 module with ER9X

Post by Alekseygo »

If to invert the 10th pin of the dm8 futaba microcontroller turns into dm9 JR!!! polarity of input PPM and an arrangement of channels changes. If the stok firmware - is better to use as dm8, then the sequence of channels is true and BNF work truly. if er9x, it is better to change contact and there will be 9 channels. Pin10 connect or not connect to GND.

Post Reply

Return to “DSM2/DSMX Mods”