er9x V2 = mbtx

er9x is the best known firmware. It has a superb range of features and is well supported by the community. Well worth trying out.
karambolis8
Posts: 12
Joined: Fri Dec 14, 2018 6:39 am
Country: Poland
Contact:

Re: er9x V2 = mbtx

Post by karambolis8 »

Ahh I guess I was too fast. I've did CPU swap, but now when setting fuses, I get
"avrdude.exe: error: program enable: target doesn't answer. 1"
Will check soldering tomorrow.

karambolis8
Posts: 12
Joined: Fri Dec 14, 2018 6:39 am
Country: Poland
Contact:

Re: er9x V2 = mbtx

Post by karambolis8 »

Ok, Its all good now with new 2561 CPU. I've enabled in Hardware menu FrSky Mod Done, but THR switch are not working.
User avatar
MikeB
9x Developer
Posts: 17990
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: er9x V2 = mbtx

Post by MikeB »

If the AIL switch is working then I think you need to check the mod for the THR switch is OK.

Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
karambolis8
Posts: 12
Joined: Fri Dec 14, 2018 6:39 am
Country: Poland
Contact:

Re: er9x V2 = mbtx

Post by karambolis8 »

You were right. Checked wiring and it's all good now. I'm greatly grateful for mbtx. I can save some money on TX16S I was going to buy, but now don't necessary have to!

Post Reply

Return to “er9x”