Open TX companion and radiomaster TX12

openTx has introduced a range of new features, ideas and bling. It is fast becoming the firmware of choice for many users. openTx will run on ALL current hardware platforms, including the gruvin9x and sky9x boards. Work has already started to support the new FrSky X9D radio!
Post Reply
SpaceTrucker29
Posts: 2
Joined: Sat May 15, 2021 4:07 pm
Country: -

Open TX companion and radiomaster TX12

Post by SpaceTrucker29 »

My radio master tx12 seems to communicate with opentx companion, and I updated the firmware.
But before and after the firmware update, I am noticing the same issue, when I read the models from the transmitter (that I've created in the transmitter) companion opens the file but only shows the models that are factory loaded on the transmitter not the ones I've created.

Then when I create a model in companion and push it to the transmitter it seems to work, no error msgs, but doesn't show on the transmitter. Transmitter still shows the default models plus the one I created there and DOES NOT show the new model I created in companion.

Companion v 2.3.11

I can read and write to the SD card through the cable so I know it's communicating.
Any help would be appreciated. If I can't get this figured out it's going to seriously limit the use of this radio..!
Open TX companion version:
IMG_20210515_101755.jpg
Open TX companion version
(2.14 MiB) Not downloaded yet
TX 12 bootloader:
IMG_20210515_101811.jpg
TX 12 bootloader
(1.57 MiB) Not downloaded yet
Tx12 firmware version?:
IMG_20210515_102207.jpg
Tx12 firmware version?
(1.1 MiB) Not downloaded yet
Conflicting information about firmware version from a different screen:
IMG_20210515_102304.jpg
Conflicting information about tx12 firmware version from a different screen
(1.18 MiB) Not downloaded yet
Models written from companion to tx12:
IMG_20210515_101915.jpg
Models written from companion to tx12
(3.16 MiB) Not downloaded yet
Models unchanged in TX 12:
IMG_20210515_102401.jpg
Models unchanged in TX 12
(1.23 MiB) Not downloaded yet
Windows drivers:
IMG_20210515_103506.jpg
Windows drivers
(3.93 MiB) Not downloaded yet
Windows drivers with TX in bootloader mode:
IMG_20210515_104127.jpg
Windows drivers with TX in bootloader mode
(2.37 MiB) Not downloaded yet
I'm hoping there's a simple brainless answer to this LOL
I'm obviously a noob and have no idea what I'm doing....
but no one was born knowing this stuff everyone had to start somewhere! Any help will be appreciated!

If this is posted improperly I trust you will delete it ,reprimand me, and point me to the proper forum!
:shock: thanks

SpaceTrucker29
Posts: 2
Joined: Sat May 15, 2021 4:07 pm
Country: -

Re: Open TX companion and radiomaster TX12

Post by SpaceTrucker29 »

Update what I figured out is that the radio master tx12 will connect to the companion but you can't upload model files you have to get the TX 16s
User avatar
Kilrah
Posts: 11108
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: Open TX companion and radiomaster TX12

Post by Kilrah »

You totally can.

Post Reply

Return to “openTx”