OpenTX 2.3.11 crashes when selecting XJT on 9XR-PRO

openTx has introduced a range of new features, ideas and bling. It is fast becoming the firmware of choice for many users. openTx will run on ALL current hardware platforms, including the gruvin9x and sky9x boards. Work has already started to support the new FrSky X9D radio!
Post Reply
maiksk
Posts: 1
Joined: Thu Mar 18, 2021 9:57 pm
Country: -

OpenTX 2.3.11 crashes when selecting XJT on 9XR-PRO

Post by maiksk »

I have problems with opentx 2.3.11 on my 9XR-PRO with frsky XJT.
The symptoms when I do select XJT as HF module:
-When switching on the 9XR, it comes up surprisingly quick. And the boot screen is missing.
-In the main screen an exclamation mark is shown
-DEBUG screen shows UNEXP.SHTDOWN
-I can not select any other model
-I can not change the HF module in the model setup page from XJT to any other. If I try select HF modus then the model setup page closes by rebooting the 9XR.
Binding works and I can fly the model.
When I change the HF mode to something different than XJT with Companion, then I am able to change the model or the HF mode, as long I do not reboot when a model is selected which uses XJT.

If I use a Multi HF module or PPM everything works fine
With OenTX 2.2.4 or ersky9xr there are no problems.

So it does not seem to be a physical problem


Any ideas?
thanks

Post Reply

Return to “openTx”