RB30 "servo overload, power overload" voice prompt

openTx has introduced a range of new features, ideas and bling. It is fast becoming the firmware of choice for many users. openTx will run on ALL current hardware platforms, including the gruvin9x and sky9x boards. Work has already started to support the new FrSky X9D radio!
Post Reply
dsa44
Posts: 35
Joined: Mon Feb 03, 2014 10:54 pm
Country: -

RB30 "servo overload, power overload" voice prompt

Post by dsa44 »

Hi there.
Running X10s accst with OTX 2.3.11 and RB30 with latest fw
X8R latest fw attached to RB30 via sbus and Sport.
When I power on unit with no servos attached, I get a one time voice message...."servo overload, power overload"
If just the X8r powered up, not attached to the RB30, no issue, so it is coming from the RB30?
I have no idea what to do about this or just ignore it?
Cheers, DSA

dsa44
Posts: 35
Joined: Mon Feb 03, 2014 10:54 pm
Country: -

Re: RB30 "servo overload, power overload" voice prompt

Post by dsa44 »

I was surprised that upon updating to accst v2.1 on iXJT and the X8R, the issue went away.

The RB30 is a nice unit, but there are a bunch of hoops....that's for another day and thread!
Chopperflyboy
Posts: 1
Joined: Tue Mar 02, 2021 11:20 pm
Country: -

Re: RB30 "servo overload, power overload" voice prompt

Post by Chopperflyboy »

Im having the same issue but if I only use one sport input from one reciver it gos away should I bind each reciver with telemetry or just 1 to 8 tel on 9 to 16 tel off
Any ideas would help

Post Reply

Return to “openTx”