Hi there.
Running X10s accst with OTX 2.3.11 and RB30 with latest fw
X8R latest fw attached to RB30 via sbus and Sport.
When I power on unit with no servos attached, I get a one time voice message...."servo overload, power overload"
If just the X8r powered up, not attached to the RB30, no issue, so it is coming from the RB30?
I have no idea what to do about this or just ignore it?
Cheers, DSA
RB30 "servo overload, power overload" voice prompt
Re: RB30 "servo overload, power overload" voice prompt
I was surprised that upon updating to accst v2.1 on iXJT and the X8R, the issue went away.
The RB30 is a nice unit, but there are a bunch of hoops....that's for another day and thread!
The RB30 is a nice unit, but there are a bunch of hoops....that's for another day and thread!
-
- Posts: 1
- Joined: Tue Mar 02, 2021 11:20 pm
- Country: -
Re: RB30 "servo overload, power overload" voice prompt
Im having the same issue but if I only use one sport input from one reciver it gos away should I bind each reciver with telemetry or just 1 to 8 tel on 9 to 16 tel off
Any ideas would help
Any ideas would help