S8R Receiver will not go into self check mode

openTx has introduced a range of new features, ideas and bling. It is fast becoming the firmware of choice for many users. openTx will run on ALL current hardware platforms, including the gruvin9x and sky9x boards. Work has already started to support the new FrSky X9D radio!
Post Reply
mikemcm61
Posts: 6
Joined: Fri Jan 10, 2020 1:05 am
Country: -

S8R Receiver will not go into self check mode

Post by mikemcm61 »

Hello, I hope someone can help me. I am unable to get my S8R receiver into self-check mode.
1st I tried assigning using the mixer screen X9d Lite radio to SWA as the source and then cycle through neutral 3 times quickly. Nothing happens.
2nd I powered up the transmitter and receiver and pressed the F/S (bind) button on the receiver and nothing happens there either.
Both times I made sure the throttle was all the way down and all sticks centered. I'm stuck. :(

User avatar
Kilrah
Posts: 11108
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: S8R Receiver will not go into self check mode

Post by Kilrah »

Set the switch to only go from mid to 100%

Envoyé de mon TAH-N29m en utilisant Tapatalk

Post Reply

Return to “openTx”