How to save as hex?

If you have a splash screen design you would like to share. Post it here!
Post Reply
mambamax1
Posts: 30
Joined: Wed Aug 01, 2012 9:24 pm
Country: -

How to save as hex?

Post by mambamax1 »

I've looked at the instructions for a while now, but I simply can't save any of the splashes I downloaded as a hex file. I get an "error reading" message?

What I did:

Click on "load image"
Click "save to hex"


Help is appreciated! :D

User avatar
Kilrah
Posts: 11108
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: How to save as hex?

Post by Kilrah »

You need to first load an existing .hex (the one for the firmware you want to use), then open the image (it will replace the original one that is in the .hex), then save the result. In the order of the buttons really ;)
mambamax1
Posts: 30
Joined: Wed Aug 01, 2012 9:24 pm
Country: -

Re: How to save as hex?

Post by mambamax1 »

Got it. Thanks!


Quick question though. Is there a way to get rid of the "blank space" where my name used to be? There is a blank block impeding on the image where my name once was.
User avatar
MikeB
9x Developer
Posts: 17990
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: How to save as hex?

Post by MikeB »

Somewhere on the RADIO SETUP screen is an option for Splash Name, set this to OFF.

Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
mambamax1
Posts: 30
Joined: Wed Aug 01, 2012 9:24 pm
Country: -

Re: How to save as hex?

Post by mambamax1 »

Thanks!

Post Reply

Return to “Splash Screen Library”