Soldering iron timer

What skills do you need to start working on the 9x? Any recommended hardware?
Post Reply
User avatar
ShowMaster
Posts: 4327
Joined: Thu Dec 29, 2011 3:44 am
Country: -
Location: Los Angeles, CA USA

Soldering iron timer

Post by ShowMaster » Sun Jan 15, 2012 6:16 pm

Ever since I went on a cruse and left the soldering iron on in the garage I've used a timer on my electronics bench. :oops: I use a mechanical wall timer from the hardware store and mounted it in a box that powers my main power strip. It only runs for an hour so I have to reach over and give it a turn if I remember too, but it's great piece of mind when I leave the garage. I urge anyone that uses a heater, or any devices like our irons, or glue guns, to make one up. Great piece of mind to be going down the road running late and wonder if you shut it all off, especially if you heading for the airport or curse line for a much needed vacation, not to mention just a weekend away. OK, enough said, you get the picture. :idea:
SM


pmackenzie
Posts: 236
Joined: Tue Dec 27, 2011 11:19 pm
Country: -
Location: Don Mills, Ontario

Re: Soldering iron timer

Post by pmackenzie » Sun Jan 15, 2012 7:33 pm

My soldering station shuts down if it senses that it is not actually being used.

Not sure how it does it, but it means I no longer can forget to shut it off.
Doesn't help me with my Monokote iron though..... :lol:

Pat MacKenzie

User avatar
Rob Thomson
Site Admin
Posts: 4543
Joined: Tue Dec 27, 2011 11:34 am
Country: United Kingdom
Location: Albury, Guildford
Contact:

Soldering iron timer

Post by Rob Thomson » Sun Jan 15, 2012 7:53 pm

I think this is a general good practice idea. I think I will do this myself!


Sent from my iPhone using Tapatalk
Slope Soaring, FPV, and pretty much anything 'high tech'
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!


Post Reply

Return to “Soldering, Hardware, Skills”