9xr gyro head locking AR7200bx

Programming your 9x using the stock firmware that comes with the radio. (Note. This is for the th9x, not the X9R)
Post Reply
thepiper92
Posts: 2
Joined: Fri Jun 13, 2014 6:06 am
Country: -

9xr gyro head locking AR7200bx

Post by thepiper92 »

I have the 9xr working with my 450x, but there is one issue.

I have ch 5 set at 100% p3 on, so that p3 adjust between rate mode and head locking. The lights on the unit show that indeed p3 is working, and the lights move and it does go from rate to head lock. The issue is that if I say increase gain on headlock the heli piros right, move it back and into rate, it will piro left, almost as if the p3 is trimming rudder. I have no other mixes on rudder though, so I am unsure of why the heli is behaving this way. I can't leave it at zero as it makes the heli very slow on the tail. I just want to use p3 to adjust my gain and not have rudder trimming left or right.

Post Reply

Return to “stock firmware (fly sky th9x)”