MCPX + OragenRx TX + Stock

Programming your 9x using the stock firmware that comes with the radio. (Note. This is for the th9x, not the X9R)
Post Reply
shguro
Posts: 2
Joined: Tue Feb 26, 2013 5:44 pm
Country: -

MCPX + OragenRx TX + Stock

Post by shguro »

Hi Guys,
i bought a used Nano Balde CPX, OrangeRx Module and a brand new Tunigy 9x.
But the Motor will not work i think the Throttle Hold is wrong configured, the rest work well.
Can i control a CPX with the stock firmware?

(Sorry for my bad english)

User avatar
Kilrah
Posts: 11108
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: MCPX + OragenRx TX + Stock

Post by Kilrah »

Not with stock firmware and Orange module, no. Your 9X is putting out the throttle signal on channel 3, while the CPX expects it on channel 1. And the other way around with elevator.
shguro
Posts: 2
Joined: Tue Feb 26, 2013 5:44 pm
Country: -

Re: MCPX + OragenRx TX + Stock

Post by shguro »

Thanks for the answer.
Okay than i flash them the next days, but with the er9 Firmware it will be no problem or?
User avatar
Kilrah
Posts: 11108
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: MCPX + OragenRx TX + Stock

Post by Kilrah »

No problem once reflashed.

Post Reply

Return to “stock firmware (fly sky th9x)”