9xr and ppm

Programing help and example for all firmwares based on thus's th9 firmware.
Post Reply
salvodjkr
Posts: 1
Joined: Tue Apr 06, 2021 12:43 pm
Country: -

9xr and ppm

Post by salvodjkr »

I am successfully using the trainer output to wire my underwater rov. With the turnigy 9xr (openTX) I can only control 8 channels. I read that it is possible to use other 8 channels of the RF port output of the radio. The decoder is an arduino attached to the code I am using. Anyone use this method? could you connect another arduino and control the other 8 channels?

the library used is this
https://github.com/PZotya/PPM2PWM

I wanted to know if it is possible to use the rf port to have other 8 ppm channels, and if it is possible to adapt the code to receive channels from 9 to 16

User avatar
Kilrah
Posts: 11108
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: 9xr and ppm

Post by Kilrah »

You can set OpenTX to put out 16 channels on the module port (top pin) and connect to that instead of the trainer jack.
Post Reply

Return to “er9x / gruvin9x / th9 based firmwares”