Trim idle only issue

Programing help and example for all firmwares based on thus's th9 firmware.
Post Reply
Rudeboy
Posts: 3
Joined: Sun Feb 28, 2021 5:09 pm
Country: -

Trim idle only issue

Post by Rudeboy »

Hello,

I'm having a "trim idle only" issue on my TX16S.
If I select trim idle only, the transmitter somehow offsets the throttle mix by 50%, and throttle output runs from neutral to 100% instead of -100% to +100%.

If I deselect trim idle only, the throttle output returns to normal.

This was on a freshly created model, no mixes or offsets appear in the inputs, outputs and mixer menus.
A flying buddy of mine is having the same issue on his TX16S.

Any ideas?

User avatar
Kilrah
Posts: 11108
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: Trim idle only issue

Post by Kilrah »

Version?
What's set as Trim Switch?
Rudeboy
Posts: 3
Joined: Sun Feb 28, 2021 5:09 pm
Country: -

Re: Trim idle only issue

Post by Rudeboy »

Transmitter is running otx 2.3.10

Trim switch is the stock assigned throttle trim switch T3
User avatar
Kilrah
Posts: 11108
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: Trim idle only issue

Post by Kilrah »

Some fixes for that were made in 2.3.11, although it should work in 2.3.10 if you don't have special things like crossed trims
Rudeboy
Posts: 3
Joined: Sun Feb 28, 2021 5:09 pm
Country: -

Re: Trim idle only issue

Post by Rudeboy »

Found it:

The standard channel order is set to AETR.
I set up my model as TAER, like I'm used to from my Graupner days.

This must created some sort of conflict with the trim switches in the software.

Thanks for the feedback.

Post Reply

Return to “er9x / gruvin9x / th9 based firmwares”