Sounds do not play in model editor

A fork of eePe. It's aim is to provide one tool that works with ALL firmwares!
Post Reply
LightningStalker
Posts: 1
Joined: Sat Nov 25, 2017 5:38 am
Country: -

Sounds do not play in model editor

Post by LightningStalker »

Hello. When I simulate the Taranis, the sounds play just fine, but they do not play under Special Functions when editing the model.

CRBF86
Posts: 7
Joined: Wed Oct 24, 2018 1:59 pm
Country: -

Re: Sounds do not play in model editor

Post by CRBF86 »

I'm using the companion not connected to radio to play with some settings.
Companion does not see the sounds
But I see that no posts on this forum since 2017? so this must be dead now.
rdeanchurch
Posts: 750
Joined: Tue Dec 27, 2011 11:22 pm
Country: United States
Location: Carson City, Nv

Re: Sounds do not play in model editor

Post by rdeanchurch »

The most common problem is not having the path to the clone of the SD card that contains the sounds set correctly. Of course this implies you have an exact clone of the transmitters SD card on your PC.
Attachments
SD-Path.PNG
Dean
OldDmbThms: 1. Takeoff, 2. Crash, 3. Repair, GOTO 1
CRBF86
Posts: 7
Joined: Wed Oct 24, 2018 1:59 pm
Country: -

Re: Sounds do not play in model editor

Post by CRBF86 »

Thanks for the help! I'll enter the info on that line. I do have the SD card contents copied in a folder.
I copied that file into a blank SD card and inserted that into the port, but had no luck.
Update;
That was easy!
working now, thanks again for your help
Chris

Post Reply

Return to “companion9x”