Betaflight Modes issues

Not sure what firmware to use? Making a new firmware? Ask in here!
Post Reply
51FiftyFPV
Posts: 3
Joined: Mon Dec 03, 2018 9:34 am
Country: -

Betaflight Modes issues

Post by 51FiftyFPV »

I recently got a Eachine E010s, FrSky version, I am using a Taranis X9D + radio, I have it configured and flying(angle only) as I can’t get betaflight to allow any range to set so I can switch between angle and horizon, the one time it appeared to be set in betaflight and switching correctly absolutely nothing as far as flight characteristics changed, it was still impossible to roll, flip, loop,etc. If anyone can help I would really appreciate it. And Thank you in advance!


Sent from my iPhone using Tapatalk

TimShoo
Posts: 3
Joined: Tue May 28, 2019 8:08 am
Country: -

Re: Betaflight Modes issues

Post by TimShoo »

I had a similar problem a while back. My modes were set in betaflight when I put my (cheapest ebay parts)drone away for the winter but when I took off for the first time, it was stuck in acro mode. I would change it back and it would stay for a few hours, or days, whatever it felt like then randomly reset only the flight mode settings and nothing else. A little research said (if I remember correctly) something about faulty eeprom that would appear to work fine but randomly loose bits of data. I had to get a new fc.
Post Reply

Return to “other”