Wiring of the Hotend Cable Plug (CR10 3D Printer)

Any 3D printing projects
Post Reply
User avatar
bob195558
Posts: 2377
Joined: Sun Dec 16, 2012 7:24 pm
Country: United States
Location: New England, Vermont
Contact:

Wiring of the Hotend Cable Plug (CR10 3D Printer)

Post by bob195558 »

Wiring Diagram for Hotend Cable Plug Connections to Control-Box for the CR10 Printer

------------------------------------------------------------------------------------------
How to disassemble the Hotend-Plug to the Control-Box
1) Undo the two clamp screws.
2) Unscrew the black part of the plug from the metal part of the plug.
------------------------------------------------------------------------------------------

CR10 Hotend Cable Connections_e.jpg
1 = Hotend Heater (not polarity sensitive)
2 = Hotend Heater (not polarity sensitive)

3 = Hotend Thermistor (not polarity sensitive)
4 = Hotend Thermistor (not polarity sensitive)

5 = Hotend Fan, Yellow +12 volts (polarity sensitive)
6 = Hotend Fan, Blue -12 volts (polarity sensitive)

7 = Part Cooling Fan, Red +12 volts (polarity sensitive)
8 = Part Cooling Fan, Black -12 volts (polarity sensitive)






Hotend Cable_Tough Extruder Heatsink_a.jpg
Last edited by bob195558 on Mon Oct 05, 2020 1:57 am, edited 3 times in total.
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).

User avatar
bob195558
Posts: 2377
Joined: Sun Dec 16, 2012 7:24 pm
Country: United States
Location: New England, Vermont
Contact:

Re: Wiring of the Hotend Cable Plug (CR10 3D Printer)

Post by bob195558 »

TH3D Tough Direct Heatsink Extruder with V6 Hotend_b.jpg
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
User avatar
bob195558
Posts: 2377
Joined: Sun Dec 16, 2012 7:24 pm
Country: United States
Location: New England, Vermont
Contact:

Re: Wiring of the Hotend Cable Plug (CR10 3D Printer)

Post by bob195558 »

V6 Heavy Duty Mount Bracket_aa.jpg
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).

Post Reply

Return to “3D Printing”