I'm using a 9XR Pro with XJT module, ErskyTx v222.
Receiver is Frsky R-XSR with SBUS and Smartport connected to Matek F411WSE flight controller under iNav, iNav telemetry enabled, wired to TX2 per Matek instructions.
On the 9XR Pro:
Protocol:
External XJT
Proto XJT RxNum 0
Detect Telem. Auto
Type D6(X)
Telemetry:
UsrProto FRHUB (or FrSky, I have tried both many times)
BT Telemetry Off
Telem. Com Port 1
Com Port Invert None
There is telemetry coming from the receiver, A1 reports the voltage powering the receiver, and RSSI is also reported. But no telemetry from the flight controller is reported, for example GPS coordinates are always zeroes.
Any ideas how to proceed? Thanks!
No Smartport Telemetry showing on 9XR Pro
Re: No Smartport Telemetry showing on 9XR Pro
Double check your wiring and CLI serial settings. Should be:
# serial
serial 0 2 115200 57600 0 115200 (Sbus RX)
serial 31 32 115200 115200 115200 115200 (SoftSerial SPORT)
N.B. Power off/on after changing serial settings.
My radio settings are :
Version ersky9x-A4r223
Telemetry
UsrProto FrSky Met
BT Telemetry Off
Telem. Com Port 1
Com Port Invert None
COM2 Func. Telemetry
COM2 Baudrate Auto
COM1 Baudrate Auto
Create a custom telem page and add TmOK. It should show "2".
What version are you running on the radio?
When you get it running, you may be interested in a telemetry viewer app on Android. See my blog for connecting a BT module to the XJT.
https://www.rcgroups.com/forums/showthr ... roid-phone
# serial
serial 0 2 115200 57600 0 115200 (Sbus RX)
serial 31 32 115200 115200 115200 115200 (SoftSerial SPORT)
N.B. Power off/on after changing serial settings.
My radio settings are :
Version ersky9x-A4r223
Telemetry
UsrProto FrSky Met
BT Telemetry Off
Telem. Com Port 1
Com Port Invert None
COM2 Func. Telemetry
COM2 Baudrate Auto
COM1 Baudrate Auto
Create a custom telem page and add TmOK. It should show "2".
What version are you running on the radio?
When you get it running, you may be interested in a telemetry viewer app on Android. See my blog for connecting a BT module to the XJT.
https://www.rcgroups.com/forums/showthr ... roid-phone
S500 + Pixhawk 1 clone + Mauch PM + C&T Telemetry adapter + 9XR-Pro (Taranis gimbals)/XJT/X8R