Control differential ailerons with a pot

ersky9xr is the port of the er9x firmware to the 9XRPRO radio.
Post Reply
tetramonium
Posts: 6
Joined: Mon Mar 12, 2018 5:45 pm
Country: -

Control differential ailerons with a pot

Post by tetramonium »

Hi
Is there a simple way to control differential on ailerons with a potentiometer
Thank you

User avatar
jhsa
Posts: 19480
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: Control differential ailerons with a pot

Post by jhsa »

The answer to your question is, there is probably a simple way, but we need more information please.. What exactly do you want to do?

Simple is relative by the way :) ;) What is simple for me might not be for you ;) :D

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
tetramonium
Posts: 6
Joined: Mon Mar 12, 2018 5:45 pm
Country: -

Re: Control differential ailerons with a pot

Post by tetramonium »

I want to use a pot to adjust differential ailerons
Is there a way to adjust the diff val with a pot?
Sorry for my bad english and thanks for answer
Christophe

Edit perhaps it's important it's for flying wing

Edit 2 not sure but I think I want to do something like here
I try this but doesn't work correctly

Edit 3 sorry the exemple here seem work
Thank again for answer
Christophe
User avatar
jhsa
Posts: 19480
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: Control differential ailerons with a pot

Post by jhsa »

So, the last example worked for you? did you try it?

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
tetramonium
Posts: 6
Joined: Mon Mar 12, 2018 5:45 pm
Country: -

Re: Control differential ailerons with a pot

Post by tetramonium »

Yes seems to work
Thank you again
Christophe

User avatar
jhsa
Posts: 19480
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: Control differential ailerons with a pot

Post by jhsa »

Nice that you found it.. Well done :)

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
User avatar
MikeB
9x Developer
Posts: 17990
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: Control differential ailerons with a pot

Post by MikeB »

Mixes do have an option to use "Diff" (for differential) instead of a curve or expo. If you select "Diff", you then normally set a value, but you may also use a Gvar (Global variable). If you use a Gvar, you may set the Gvar source to be a pot. I'll hopefully post an example of doing this later today.

Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!

Post Reply

Return to “ersky9xr”