turnigy 9xrpro+xjt+x4rsb no rssi
turnigy 9xrpro+xjt+x4rsb no rssi
Hi i change software in my radio for ersky9xr 221. And i have problem with rssi . on my old soft i use futaba cable and telemetry com 2. Now it doesnt work. Plz help because without rssi i dont know when lost a signal
- MikeB
- 9x Developer
- Posts: 17993
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: turnigy 9xrpro+xjt+x4rsb no rssi
If you have a XJT, then use COM1, and set the module protocol to XJT (D16).
Mike
Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: turnigy 9xrpro+xjt+x4rsb no rssi
With the XJT module there is no need for the telemetry cable with the futaba connector.
João
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW