The Trim button is not working very well......assuming all trim is at the center......to center all the trim, I just press the trim button u til I feel the vibrate.
Now, if I press the Right trim button once, then press the left trim button once its should go back to center and feel it vibrate, this will work only up to 3 click only.
If you press right click 4 times your should able to put it back to center by pressing 4 times left trim button......but it only need 3 time then you feel it vibrate........
If you press right click 10 times .......you need only 8 times to put it back to center.......
I am not sure if this is a bugs or need to set some setting in the transmitter......
9XR Pro Trim button not functioning well.....
Re: 9XR Pro Trim button not functioning well.....
You have the trim increment set to "EXP" (Exponential).
Try going to "Model Setup / General", scroll down to "Trim Inc" and set it to "Fine"
João
Try going to "Model Setup / General", scroll down to "Trim Inc" and set it to "Fine"
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: 9XR Pro Trim button not functioning well.....
Ok......Now its working Perfectly......Thanks again.
See a fast result here......
See a fast result here......