Smartiepartz board Rev 2.3 multi-module?

Everything about the smartie programmer and backlight kit!
Post Reply
blackpanther
Posts: 13
Joined: Thu Jan 10, 2013 7:03 am
Country: -

Smartiepartz board Rev 2.3 multi-module?

Post by blackpanther »

Its been so long since I've messed with my radio and I want to do a multi module setup..
Does anyone know if the smartiepartz board rev 2.3 can do multi module.
I'd like to put the original module inside the receiver and be able to switch between that and a module I place on the back.
This is for a V2 Turnigy 9X

Can someone tell me if this is possible?

User avatar
bob195558
Posts: 2377
Joined: Sun Dec 16, 2012 7:24 pm
Country: United States
Location: New England, Vermont
Contact:

Re: Smartiepartz board Rev 2.3 multi-module?

Post by bob195558 »

I believe you are talking about the Smartieparts 9x Solderless Programmer Board Rev 2.3 which has nothing to do with transmitting modules.
See Discontinued Products here: (http://smartieparts.com/shop/index.php? ... ex&cPath=9)

Smartieparts did sell an upgrade board that would do what you want, but is sold out for a lone time now.
It would nice if there were still some 9Xtreme boards available for sale,
more 9Xtreme info here: (http://openrcforums.com/forum/viewtopic.php?f=95&t=7182)
and (http://smartieparts.com/shop/index.php? ... cts_id=378).

There was other upgrade boards and they are sold out too.
You could ask if anyone has one for sale.
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
blackpanther
Posts: 13
Joined: Thu Jan 10, 2013 7:03 am
Country: -

Re: Smartiepartz board Rev 2.3 multi-module?

Post by blackpanther »

Thanks. I'll have to look around for a 9xtreme board
User avatar
jhsa
Posts: 19480
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: Smartiepartz board Rev 2.3 multi-module?

Post by jhsa »

They are out of.production. It will be very difficult to find one.. :(
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
User avatar
MikeB
9x Developer
Posts: 17990
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: Smartiepartz board Rev 2.3 multi-module?

Post by MikeB »

Are you running the original firmware, or have you flashed an open source firmware (er9x or openTx)?
Since the multi-module supports the original Flysky protocol, do you still need the original Tx module?

Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!

Post Reply

Return to “SMARTIEPARTS PROGRAMMER”