SP basic rev 1.1

Everything about the smartie programmer and backlight kit!
Post Reply
achilo
Posts: 2
Joined: Sun Jun 18, 2017 2:57 pm
Country: -

SP basic rev 1.1

Post by achilo »

Hello,

I would like to ask if there is anywhere tutorial how to use SP basic rev 1.1 programmer for flash of Turnigy 9X to ER9X firmware? I can't find straight guide how to do it and not shure if it't tha same procedure like with 9Xtreme board.

thank you

User avatar
jhsa
Posts: 19480
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: SP basic rev 1.1

Post by jhsa »

It's not the same Procedure..
Did you try searching the "Smartieparts" website? They should have all the information you need there..

João

Sent from my thor using Tapatalk

My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
s_mack
Posts: 882
Joined: Thu Dec 29, 2011 6:11 am
Country: -

Re: SP basic rev 1.1

Post by s_mack »

The Spbasic is just a purpose built usbasp programmer, so any tutorial on flashing firmware to your 9x is relevant. I'm sorry, I'm on the road now, otherwise I would post a link to one. But Google "how to flash er9x" (or opentx).
achilo
Posts: 2
Joined: Sun Jun 18, 2017 2:57 pm
Country: -

Re: SP basic rev 1.1

Post by achilo »

@ jhsa: Smartieparts website describe only hardware instalation, with this I'm ok. I'm mainly focused now to the software part. If I can just taky any tutorial using eepe and correct firmware version.

@ s_mack: when you have time please post some link for me . Thank you. Meanwhile I will google how to flash it . I just don't want to brick something.

Post Reply

Return to “SMARTIEPARTS PROGRAMMER”