r9mm problem (frsky software)

Post Reply
krzyszo
Posts: 1
Joined: Mon Jun 28, 2021 6:08 am
Country: -

r9mm problem (frsky software)

Post by krzyszo »

Hello, has anyone had such a problem with the R9mm mini receiver that after pairing the green and red LEDs are on, the radio catches the transmitter's range and telemetry for literally about 10 seconds and then I lose it. The flysky nv14 radio still beeps (binds) after binding (but this was not a problem before).

It started after the action:

1.The antenna popped out from the antenna socket, but I put the antenna in again without any damage to the visible socket.

2.I bought another r9mm (ota), I bound and it works normally, but I do not believe that the transmitter memory is only one receiver and it rejects the older r9mm

3. protocols the same fport, the same software etc. Or maybe the problem is that I choose the same 1-8 channel telemetry on both receivers?

4. he could be physically damaged (but how) ???

Post Reply

Return to “openTx model setup”