wing with 4 servos, 2 ail, 2 flaps - cant get it right...

Post Reply
imrj
Posts: 3
Joined: Sun Apr 23, 2017 2:31 pm
Country: -

wing with 4 servos, 2 ail, 2 flaps - cant get it right...

Post by imrj »

x9d+ with latest opentx. a wing with 4 servos (each on independent channel) for 4 control surfaces, 2 outboard ailerons, 2 inboard flaperons.....how do I mix the inboard flaperons to assist the outboard ailerons (as when additional deflection is needed the flaperons kick in to help roll rate) and equally to assist with elevon pitch rate. But I want to setup the craw style where for landing the outboard ailerons are in a flaps down position and the inboard flaperons act as spoilers (or flaps down, i.e. conditional on switch setting)

ReSt
Posts: 1581
Joined: Tue Dec 27, 2011 11:34 pm
Country: -

Re: wing with 4 servos, 2 ail, 2 flaps - cant get it right...

Post by ReSt »

I searched the forum for my old entries of how I have programmed my HK Phoenix2000 for ER9x and OpenTX (nowadays really old versions)
With probably some minor adaptions, I still fly it with this programming.
Different to your proposal, for craw I use ailerons up and flaps down.
In the descriptions, every mix is explained

viewtopic.php?f=35&t=919
viewtopic.php?f=45&t=2638&p=107311&hili ... ix#p107493
download/file.php?id=5208
download/file.php?id=5209

Reinhard
Post Reply

Return to “openTx model setup”