openrcforums

Hi,
A good source for information and pictures for help installing the New Replacement Taranis Gimbals into the 9x Radio, See: (http://openrcforums.com/forum/viewtopic.php?f=95&t=4281).

I would like to know that as well as I would prefer them over the amplified ones. Suggestion - maybe could ask Aloft Hobbies (http://www.alofthobbies.com/contact) USA and/or (http://www.t9hobbysport.com/contact-t9hobbysport) England. Maybe they have the Replacement Taranis non-amplified Potentiomet...

Hi volumax, I believe they will work because they both are 5K Potentiometers and they both work with the same total stick movement of 55 degrees. (Amplified Angular Rotation Sensors, muRata A01316 Pboard Rev 0.2 and the newer Potentiometers are the Non-amplified Angular Rotation Sensors) They both a...

Hi lebenj , I like to view different ways to solved a problem and/or a task to be done. I had looked at flipping the Amplified Potentiometer over and saw that because of the Amplified Circuit was spacing it to far away from engaging the shaft, I decided not to go any further with this option because...

Hi Istvan (feket663), It dose not make any difference, if you have the Taranis Gimbals set with the amplified circuit Potentiometer (old version) and/or the Potentiometer without the amplifier circuit (new version), the performance is same with between the old and new Potentiometer versions. I would...

Hi Kilrah, Thank you showing me Subscribe topic button. I looked high and low (mostly high) for something like this. This will be a great help (I didn't want to be a: (What's he doing?) but could not find it, and I wanted to follow the developments in these topics). Thank you again! I will try to re...

Hi
I want to be flagged when there is a new post to this topic.
I could not find another way to be flagged (X Notify me when a reply is posted) when there is new posting.

Hi Barrsurf, Mike has already done the fix: See: http://openrcforums.com/forum/viewtopic.php?f=7&t=4676#p65894 and/or (http://openrcforums.com/forum/viewtopic.php?f=5&t=4598&p=64969#p64969) Oh .... OK _ _ _ ..... I see you found it! COOL! Also See for Gimbal install: (http://openrcforums...

Hi Barrsurf: You may have a different Com-port number from the one that my computer assigned. So you will need to set the correct Com-port # when opening the Samba program. Also this maybe helpful, I had trouble several months ago and near the bottom I have some good pictures showing what I did: (ht...

Hi Barrsurf: This is what I did to get the USB drivers installed, go to: (http://openrcforums.com/forum/blog/bob195558/found_solution_to_install_usb_driver_b-8.html). -------------------------------------------------------------------------------------------------------------------------------------...

:| I am not sure but will this new Smart Port to UART Converter from FrSky give us the option to have two external analog Telemetry Ports (A1 & A2) with the X8R Receiver? (Dec. 04, 2013) New Release: FCS-40A, FLVSS, GPS and SP2UART (Smart Port to UART Converter, w/ 2 ADC ports) . Click on this f...

Hi I have built a Quad using the MultiWii Pro V3 Flight controller board from WiteSpyQuad (Ready To Fly Quads) and I use a 9x Radio with erSky9x firmware with FrSky XJT Transmitter Telemetry Module with the FrSky D8R-XP Receiver w/ Telemetry. Is there a way to see the Sensor Readings on the MultiWii...

Hi Kilrah, I did make an error with my suggestion that the Taranis Potentiometers maybe wired differently. I got my Digital Multimeter out and checked the Stock t9x Gimbals Potentiometers and found that the wiring between the Vertical (Throttle) and horizontal (Rudder) Stock t9x Potentiometers are d...

Thanks Mike!

I made the direction changes and it's working great.

I really appreciate your help.

Bob

Hi

I have the Sky9x Board Rev. 3 and so am using ersky9x-r188.bin firmware.

I am having trouble finding where I can change the Potentiometer directions in ersky9x .

It looks like Mikes stick version (test version) only dose the four er9x versions and dose not have an ersky9x test version ?

:D HI The new replacement Taranis Gimbals from the FrSky are a really great upgrade mod and/or fix for bad 9x Potentiometers. How to install the New Taranis Replacement Gimbals into your 9x Radio, Click this link: (http://openrcforums.com/forum/viewtopic.php?f=95&t=4281&start=90). :D Info no...

2) Installing Taranis Gimbals Hi Everyone and Volumax, I was not, for some reason, not fully understanding what you were saying about your installation with the Taranis Gimbals after being installed, that one of the Potentiometers in each Taranis Gimbals set, work in the opposite direction. I would...

1) Installing Taranis Gimbals Hi Everyone and Volumax, ___________________________________________________________________________________________________________________________________________________________ Add Edit Update: Thursday, February 06, 2014 This is what I did to Close the Two Case Ha...

Hi Volumax, I appreciate your confirming the wiring and the need to mod the Gimbals and/or 9x Radio case. As I do this Gimbals Mod to a 9x Radio, I will take pictures and post them so that others, who may be thinking of and/or doing a successful upgrade Gimbals Mod to there 9x Radio. May be after Ch...

Hi, I found for sale a TARANIS-B MAIN BOARD at: (http://www.microtechnics.eu/detail.php?categorie=FrSky&souscat=50&code=TARANIS-B%20MAIN%20BOARD&langue=en). TARANIS-B MAIN BOARD 58.00 € taxes included (I think 58.00 € is about $80.00 USA dollars) 47.93 € w/o Taxes I do not think it would...