openrcforums

and it looks like it was made for the tx.. mine is a quite tight fit..

Thanks.. Had a lot of work with that thing.. Don't know how I still have wife

Here..

Please go to the model settings on your sim model and reduce the number of PPM channels sent by the er9x to a maximum of 6. four is better but 6 might work.. your channel 1 will come back like magic..

Yeah but I think it'll increase the number of crashes and the weight on the models.. With the s-bus system, if one of the buses fail, you don't lose only one servo. you can lose an entire wing or both halves of the elevator for example.. and I don't think there is redundancy in the system.. And on b...

loool

difference is just a replace.. Why is that a bug?? you can do it in a couple other ways.

well it looks like I've repeated myself, repeated myself, repeated myself, repeated myself, repeated myself, repeated myself,...

their site is working

http://www.frsky-rc.com/

wouldn't we need 2 receivers for thr 16 channels? or for that would we have to use PPM Sum?

That would be better done in eepe. like when you put the mouse on top.. we should not load the radio with this kind of info.. that why eepe is there, and I'm pretty sure that most of the people use it to programm anyway,..

and when switch os off, FULL rests at -100 while MAX stays at 0

FULL I understand.. But why MAX anyway??

I quite agree with Groot.. FULL travel and HALF travel.. It makes some sense.
MAX sounds good because that's what we're used to..

0-|

|-0-|

M = Middle
E = End

ME
EME

FULL
MAX

FULL
MID

What a brainstorm.. If I hear a loud bang on this side of the planet, I know what happened

I found mine at the end of a chair leg.. no, not really but found the same part at the DIY store..

Here is my winter project.. it's nearly finished.. I hope it flies.. It's a little heavy at +- 1300g with battery. But that was expected anyway.. 37cm between front and rear motors, and 35cm between left and right motors. Just need to throw some paint at it and test the flight controller (Multiwii),...

ok, understand now.. thanks.

don't we have enough extra pins to put them ?? plus the audio mod??

my stock connector was very loose. replaced it with a servo connector

Now I'm rolling on the ground laughing again.. what a good way to start the day

No more bullet connectors for me since one made my easystar bite the dust.. only XT60 now.. they're good..

Perfect.. Congratulations.. EXCELLENT JOB....

Rob, I think this should go to the wiki..

in er9x there is no default rudder or aileron, or whatever channel.. You just put them where you want.. Want your throttle on a 3 position switch?? just do it

looool

Looking at the picture at the beginning of the thread, this battery has 2 plugs apart from the balance plug.. one connects to the radio and the other can be used for charging.. that's how I understand it.. like this you don't have to disconnect the radio..

you'll have to try the tricopters then..

menus password protected...
I shared that idea ages ago.. I know exactly what you mean..

try now.. it's working.. just put one on my cart and show the price and quantity.. acctually a friend just ordered one for me at this precise moment....
It won't last long . go and get it.. run