openrcforums

I'm not sure if I have the right FW on my TH9X/AR9X board: ersky9x-pe3r221; there is something strange: I have rudder and gaz trims reversed; except that all work fine

MP

Thanks Joao, that sound good,

MP

Hi Joao,

My PRO run r222 and my AR9X run r221;

I made a mal function on the PRO and deleted many models which were not saved on the PC ! but I have it on the AR9X...

MP

I would like to know if there is a way to copy a model from my TH9X/AR9X Tx to my 9XR-PRO ?

Thanks

MP

Hi Mike,

Yes I can get the page Boot Loader V1.0 and the three following lines:

ersky9xr_rom_r202.bin
ersky9xr_rom_bin
multi-stm-1.2.1.10.bi

I'm afraid I did a mistake since I lost my 40 models datas, oups...

BTW I don't understand the purpose of the SD card since the Tx work when it is removed.

I can't connect my PRO to my PC; there is a long time I didn'it; may be the updates changed something ? today I run 4r222.
This strange since my old TH9X running 3r221 connect fine.

What I can do ?

MP

I can see there is only two current sensors in the "X" range FrSky Rxs: 40 & 150; is it possible to buils a compatible 80-100 current sensor ?

MP

Try to short it

thanks mstrens, that is what I need; I always used an arduino with my Jeti sensors 'RCthoughts), I own many pro-mini, will it be good ?

the input of my OSD can run up to 3.3 volts, it would be good to match 330 meters

I wait your input

Thanks

MP

Hi,

I own an OSD which include a GPS which is not very accurate, is there a way to add an analog baro to one of the analog inputs ? a brand one or DIY one.

Thanks

MP

Joao

please let me know if you have a file to send a PCB maker in China

MP

Thanks Joao; amazing to see how much work to do to replace a toggle switch...

Sorry, forgot it: Ersky9x; I want to install a Jeti box Profi on the top of the box, very easy since there is no antenna and I get telemetry on the Jeti box.
I'm confused about the purpose of the menu: internal/external ? what it does ? switching PPM signal ? or is it possible to switch power ?

MP

I wish to install a second (internal) module; where I can wire it ? I can see an encoder connector on the main board ? and what about the power connection ? will it be switched by the internal/external menu ?

Thanks Joao to help me

MP

After flashing the 4IN1 328P module on my Horus OTX 2.2 with the latest FW 1.2.1.10 I can get the FS-CVT01 sensor but not the TGY-CAT01 (alitude),what I can do ?

Maybe a bug with ERSKY9X: I took an old D8RSP and I was not able to bind with both my 9XR PRO and my TH9X/AR9X; it bind only in PPM mode with DJT/XJT module and my OpenTX/Horus10.

I checked it don't work with Corona Sbus servos.

I remember tried the TH9X with a Jeti and Orange module working fine with 12 ch.Rxs

Thanks Mike; I had not the idea...

MP

Is there a way to set the 6 pos switch in order to act like a pot? since this is the way expected by my flight controller and a real pot give not secure positions.It would be increment from -100 to +100 divided by 5 segments.

I need to use the the 6P switch to choose between the 6 flight modes on my FC; how to set it in order each position match a position between 1000 and 2000ùS ?

MP

On my stick one of the pins of the pot was not crimped properly, not the case which moved.

It is easy to find S-bus servos but I'm sorry S-bus Esc don't exist.

Yes it is connected, and as I told it works with Horus/internal module/Opentx

maybe the "Alt" option in the telemetry menu of the 9XR-Pro match only the Sport connection ?

Thanks Mike, I have to add the telemetry works fine except the vario sensor; I get RSSI and voltage sensor linked to A1; I checked an other old glider with the same Rx?sensor with the same result. Of course at the time I flew those gliders the MM. don't exist...when I tell it works with Opentx it us...

Yes, I use an old glider with the vario sensor plugged on the A2 port of the "D" Rx and the multi module 9XRPRO; what is strange is the last time I fly it it worked fine but, of course, not with the multi module. I will give it a try with the XJT module.

Thanks Mike, of course it is the vario sensor, but I need to display the altitude; I remember it worked some (!) years ago with an old FW...

I can't find how to set the telemetry menu of the 221 FW to make the alt sensor work when linked with the A2 input of the D8 Rx; it works fine with my OpenTx Horus.

OK Mike, I will do that but I do apologosise for the delay: in my french farwest the web don't work all the days...
If you agree I could send you the Rx and the sensors, it would be easier, I purchased it just for experimentation.

MP

I use the FS-CVT01 (voltage) & TGY-CAT01 (altitude).

MP