openrcforums

This is a function mostly of the tx module and rx. If they support model match then I'm sure ersky9x will be able to do so. Mike. Does that mean it won't work with the stock board?? Or maybe I didn't understand? I remember you saying something about releasing a pin for the PXX serial connection wit...

Here is v322. I keep most of them.

João

CHs 9 - 16 would be understood by the module as 1 - 8, right?
Could we turn this on and off? Would this be a per model option? some people might want to let their kids learn to fly with their models

That would have to be an option one could choose.. I personaly prefer the voltage..
Also in some batteries the voltage drop really fast at the end.. so it will go, say, from 40% down to 10% in a short period of time.

I think you can even use different trim settings for the flight modes.. someone correct me if I'm wrong.

I see what you mean looool..

Ok, I extracted the splash image from a HEX file..
Now how do I put it on my radio? When is loaded into that little window does it go automatically when I flash the firmware??
Sorry guys, I'm lost here

João

lol

should I say it???

only joking

Me like it

I'm patient.. I'll just make sure you guys don't forget it

Keep the wonderful work.. you guys ROCK..
Thanks,
João

The PCM audio mod would be able to do that I think..
I know, I'm a pain in the ***

I wish I had the knowledge to do it

Hi Rick, I really like yours.. "Your Radio Sucks" lol

And I would like to have it

João

When the audio project for the er9x is complete maybe you could write that file to the SD card used for the audio files

João

"If they keep it up, just remove that pink quote button in the upper right of the post frame!!! This will force them to copy and paste, which is way too much work for the quote button clickers.!!!" It can be done easily.. Copy / Paste doesn't take too long :mrgreen: :mrgreen: :mrgreen: Jus...

You might have your throttle reversed?
If not in the software, maybe in the hardware? the pot connected reversed?
Please go to the main settings menu in your tx and check if you don't have the "reverse throttle operation" activated..

João

I just had a look at it.. I should be workin really but couldn't resist..

Very good. Thank you.

João

I'm ok with that.. I did really like that screen.. It would be a good replacement for the other one

The last one could go on the normal er9x replacing the existing one.. It might even have space to write the pilot's name, which I like as well..

João

Does gruvin9x have?: Bandgap to allow more accurate low voltage measurement. Winged Shadow How High telemetry support. Flight pack capacity used if analog A1 or A2 has current measurement. Telemetry voltage measurement up to 51.1V. Altitude in metric/imperial units if FrSky hub altitude sensor used...

To be honest I am new to the er9x firmware. I have not researched a good reason to be able to want to program the radio with it powered on. What are the benefits? I already have the er9x firmware flashed on the radio. I read that I can use the eepe software to load model data to the radio. I think ...

Now, when the multiplex is changed to multiply, instead of add, it makes the output move in the opposite direction, why is this?? I would expect the output to only move one way, whichever way you move the stick. Each mixer output goes from -100 to +100. When you multiply the mixer values are multip...

Happy New Year to all...

It sure would be nice if the comments feature on the mix pages in eepe were fully functional. Yes, you can enter a comment for each mix but unfortunately, they don't seem to be saved with the file. On some of the more complex mixes, I often find that I have to rethink the logic to understand what I...

How can we do that?? Sorry J. you are not allowed. HA lol Near the top, 3 lines down click on user control panel. Then select "friends and foes" tab. Then carefully enter the username in the add box, then click submit. Then when a chatroom is created, you can then select from that friends...

wheelspinner20 wrote:Oh ok, was not aware. That sounds like fun.

I will add you to my friends list. I believe that is what is required first so that invites to chat rooms can happen.

How can we do that??

Thanks
João

Don't know if i'm posting on the right place but there it goes.. Rob, what about a multi quote option?? Maybe there is one already and I didn't see it? Thanks, João Pretty sure there is one. I will check and get back to you when at a pc. Rob Sent from my iPhone using Tapatalk The only buttons I can...

Don't know if i'm posting on the right place but there it goes..
Rob, what about a multi quote option??
Maybe there is one already and I didn't see it?
Thanks,
João

rob.thomson wrote: I normally leave the existing connection in place, then simply solder a servo lead to the power lines on the back board. Run the lead into the battery bay - job done!


Sent from my iPhone using Tapatalk

That's what I did too.. It works well

I think eepe has to be together with mixes/Programming discussion.. Otherwise we will have 2 different places discussing mixes

Just my 2c

Ok, we have a new forum.. now would be nice to have some PCM audio for the er9x