openrcforums

You could try looking through/asking on either http://www.rcgroups.com/forums/showthread.php?t=1200443 or http://www.rcgroups.com/forums/showthread.php?t=1471122 to see if someone has the answer for you. I don't have the GPS sensor, don't really need it. Mike. How did you setup the GPS info screens...

I'm up against it here. I have a EM411 GPS module that I have communicating with my PC using a RS232 converter. I'm getting excellent data and it's picking up 8 satellites from my desk. By default it is set to 4800 baud and puts out NMEA protocol. I should be able to change the the baud on the chip ...

Will it be possible to turn a channel on and off instead of having a dedicated on/off switch plugged into the Rx.

I have a stupid question. What do I need to flash my module and Rx? The USB cable from FrSky and a RS232 board, or the one they sell...either or?

OH, and the SW they provide?

Mike that sounds like great maiden! I was talking to Erazz today and in our discussions of the board I was musing that I'd like to be able to turn one of the knobs to select different sounds. As I'm banking back toward the runway for a low pass I'll hit the trainer switch and have an air raid sound...

I'd like to start gathering things I plan on using on this board. I'd like to get a speaker of the quality that's in my cell phone. What should I be looking for, something small but sounds good? Also what sort of thing do I need for the blue tooth and the SD card? If you could, perhaps a list of thi...

OK...how do I save an image posted here at a high resolution?
Right now the only way I can save it is to right click it and save picture as.

erazz wrote:Yes, actually Frsky's protocol will allow us to have a very clever model match. I guess it's high time I have another look at it!

Thats the sheet right there!

Yeah, I know about that. Ain't no way I'm gonna start buying Spektrum stuff. I was thinking more along the lines of FrSky.
I think Erazz was talking to them about protocol.

Model match?

Being able to name a channel for whats it's used for would help. I know when I need to tweak my sub trims I forget which aileron is on CH 1, CH6 or sometimes CH 5.

Damn, I've clicked load draft button like 99% of the time!

Rafit wrote:+1 for SD card. It should be possible to store full telemetry with every frame send to model (like black box ).

Thats a good one!

I'm curious about what every else's thoughts are on the SD card. The model memory on this thing is for the most part unlimited (in the 1000's), correct? What purpose would the SD card serve? Transfer stuff from one radio to another, at the field? Between the USB and bluetooth it's not needed to inte...

I'm just following along with you guys. I was thinking from the beginning to just let the user put in their own battery for the real time clock. Could the on-board battery used as well but have a cut off if the voltage drops to what the user sets? By having both the user could select which battery t...

Here is the hex file that has the "Your radio sucks" splash screen. Just use eepe to extract it and insert it into you own flash file.

I have one of my 9x's set up with frsky telemetry. What would I need to do to connect it to the ersky board? My guess is I can get rid of the rs232 board I have in there now and use the one thats on the ersky board? If this is correct then won't I have more connections to make to the main board then...

Hope ya don't mind but I think this is worthy.

Here's one

I just did a quick test since I just found out about the splash screen thing in eepe so it took me about a minute total to do this. I just picked that image because it was right in front of me.

What do you guys think of this.

This might seem like a no brainer but does the board have reverse polarity protection? I was just changing my batt in mine today and that occured to me. I think other things might get fried but is the board protected? Also when I get back I'll post a pic of the ErSky 9X logo I came up with. I spent ...