openrcforums

Mike Dear Mike, and all dear devolopers, I am using the ye goode olde turnigy 9x transmitters again. please be so kind: -to link me an actual changelog where I can read the HISTORY: I have now V1.438-MIKE 09.05.2015 21.23.35 er9x-r818 MOD frsky NT and wonder, what HISTORICAL changes would I face if...

hello! I have turnigy 9X (NOT 9xR!!!) radio with FRSKY telemetry module, and D8R-II and D8R-II plus receivers. I found the new HUB LESS variometer sensors: http://hobbyking.com/hobbyking/store/__42311__FrSky_Variometer_Sensor_w_Smart_Port_High_Precision_Version_.html and http://hobbyking.com/hobbyki...

thank you, .sorry for talking into an older post.. my problem SOLVED.. in my great mysery I went to a friend who has notebook with GOOD OLDE WINDOWS XP (32 bits) AND IT WORKED LIKE A CHARM (firmware flashing) so you could figure how I felt for windows 7 . maybe changing eepe to XP compatibility mode...

http://www.rc-cam.com/forum/index.php?/ ... entry27092 should I remove R8 from my USB and solder it like this? I have 3 usb -s 1 will try but this is too deep for me I am an RC guy not a CPU programmer guy.

Reading | ##avrdude.exe: error: usbasp_transmit: usb_control_msg: sending control message failed, win error:(rough translation by me:)
the i/O process got interrupted ( a process ended, or an application aborted the process)

this is when I try to read FW with EEPE.

hello dear ppl. I checked visually, I HAVE 64A in the tx. I use EEPE with my SWITCHES on the radio in "default off" position, so this matters? Reading | #########avrdude.exe: error: wrong reading bytes b8 this is my problem. I use windows 7 32 bits, this programmer ( I have 3 of them) http...

hi. (yes.. I messed up again, the !ele and "ele" are switched up) -- everything works like a charm thank you everybody. the big " AHA, I GET IT" moment was when I deleted ALL mixes from flaps servos. first added AILERON-- made it to work-- then tried to add the ELE switch mix to ...

hell dear people. I tried programming, FIRST, I removed the Y cable from channel 5 (flaps now 5 & 8) -here I realised: this plane was ment to be flaps having on SEPARATE channels. MAYBE because of this was the "extreme" offset and limits on ch 5 before? because Y-cabelling the 2 flaps ...

I am interested too what will be the best replacement. recently I just purchased a 9x (mode 2 with module) from HK, and the center point of the stick could not be calibrated, it always moved away from center by itself. I BEGGED HK to make possible for me to PURCHASE some replacement pot-s from "...

ppl,

thank you very much, I will give it a try with my new knowledge.

hello. my english is poor, I understood gohstb and mikeb-s advice, succesfully removed the trim-s, NOTRIM string appeared THANKS!! eepe simulating looks BETTER!! flaps move now all the way. but sorry, I try to translate the second comment, but my english fails pls help meg a little here, explain lon...

eepe file:

https://docs.google.com/file/d/0BxKDBhM ... sp=sharing

TAURUS -modell memory is the original (NO MIX between AIL and FLAPS )

-(FLAPS with Y cable , both servos on CH5)

taurusTEST: modell memory:

CH 5 copied to CH8, Y cable removed..

I also see the possibility:

SOURCE: CH1...x

"chaining" mixes? wow.. so.. still confused.. how to do this

so, I am confused, WEIGHT, OFFSET.. LIMITS.. I can not (yet) think, what will be the solution here, any help kindly thanks!

hello there! I have a 190 cm wingspan RC plane, OUTER half of the wing is AILERON (of course, moving up-down ) inner half of the wing is FLAPS (this chan physically move JUST to horizontal or to down to vertical, can NOT move above horizontal.. the servos are also mounted a bit forward like the AIL ...

hello there, dear ppl.

please. let me know, here in this topic, if you find any other change made on turnigy 9x transmitter, like this plastic molding difference on the module pins.

thank you very much.

Marton.