Search found 661 matches
- Mon May 13, 2024 11:20 am
- Forum: Hardware
- Topic: Horus x12s 'Bricked
- Replies: 6
- Views: 2562
Re: Horus x12s 'Bricked
Hopefully you are right. Just ordered one usb board. Ill update, as soon as i get it, in 1 to 2 months, most likely.
- Mon May 13, 2024 12:04 am
- Forum: Hardware
- Topic: Horus x12s 'Bricked
- Replies: 6
- Views: 2562
Re: Horus x12s 'Bricked
Yes Mike, that's the case. Battery charged now. Tried different cables now and still the same. Disassembled the radio and removed the battery, plugged back in and its still dead.
- Sun May 12, 2024 10:00 pm
- Forum: Hardware
- Topic: Horus x12s 'Bricked
- Replies: 6
- Views: 2562
Re: Horus x12s 'Bricked
HI, today when installing edgetx 2.10 on my x12s the flash process stoped showing the progress bar ojn the same place for some 3 hours, then it went black due to empty battery, so i thnik, and now its completly dead. Not even detect by pc. Any help would be appreciated, thx.
- Fri Dec 15, 2023 2:59 pm
- Forum: Turnigy 9XR PRO radio
- Topic: 9XR PRO - better gimbals
- Replies: 100
- Views: 162627
Re: 9XR PRO - better gimbals
Hi, I tried purchasing those gimbals and I got this. What went wrong?
- Mon Apr 24, 2023 7:18 pm
- Forum: Hardware
- Topic: New gimbals for old 9x
- Replies: 3
- Views: 3838
Re: New gimbals for old 9x
Nice work with your 9x. Its an absolute beast. For the gimbals, you might have a look at this mod https://openrcforums.com/forum/viewtopic.php?p=154744&hilit=9xr+pro+gimbals#p154744 and get some ideas, because i have doubts that the holes will match, because radiomaster tx16s gimbals look smaller.
- Mon Mar 06, 2023 10:04 am
- Forum: FrSky Taranis radio
- Topic: X9d back board component[SOLVED]
- Replies: 6
- Views: 9096
Re: X9d back board component [SOLVED]
So it was a cable problem. All working.
- Mon Mar 06, 2023 9:19 am
- Forum: FrSky Taranis radio
- Topic: X9d back board component[SOLVED]
- Replies: 6
- Views: 9096
Re: X9d back board component
When i try to flash through eepskye, a message appears "Tx disk not mounted" and simply wont flash.
At this time the radio wont power on anymore. Its completely dead.
At this time the radio wont power on anymore. Its completely dead.
- Sun Mar 05, 2023 7:07 pm
- Forum: ersky9xr
- Topic: Does ELRS module work fully with 9xr pro?
- Replies: 10
- Views: 6173
Re: Does ELRS module work fully with 9xr pro?
Scripts are here: https://openrcforums.com/forum/viewtopic.php?f=7&t=10668 . I assume the module will work at full power, but I cannot test it myself. The script did allow setting the power when I tried it. Mike Hello, sorry to bother you again. Just want to know if a crossfire module will work...
- Sun Mar 05, 2023 6:19 pm
- Forum: FrSky Taranis radio
- Topic: X9d back board component[SOLVED]
- Replies: 6
- Views: 9096
Re: X9d back board component
I will try again, but i never had a problem with updating a tx in dfu mode, in fact, just before this one i updated another taranis and all went ok, but i will give it another try.
- Sun Mar 05, 2023 3:03 pm
- Forum: FrSky Taranis radio
- Topic: X9d back board component[SOLVED]
- Replies: 6
- Views: 9096
- Sun Mar 05, 2023 9:50 am
- Forum: FrSky Taranis radio
- Topic: X9d back board component[SOLVED]
- Replies: 6
- Views: 9096
X9d back board component[SOLVED]
Usb connection is not working with my x9d turned off. It is recognized on pc, as I see stm32bootloader on device manager, but I cannot flash, since an error occurs. Later I realize that https://openrcforums.com/forum/download/file.php?mode=view&id=20935 is shorting. What component is it and is i...
- Sat Mar 04, 2023 1:43 pm
- Forum: erskyTx (was ersky9x)
- Topic: ERSKYTx (was ersky9x) Questions
- Replies: 2347
- Views: 1353331
Re: ERSKYTx (was ersky9x) Questions
Hi, can anybody, post here a working script for elrs v3 to use with the 9xr pro, thx. Im not good with software editing. Thx in advance.
- Tue Feb 07, 2023 12:54 am
- Forum: erskyTx (was ersky9x)
- Topic: ERSKYTx (was ersky9x) Questions
- Replies: 2347
- Views: 1353331
Re: ERSKYTx (was ersky9x) Questions
Hi, will this script support elrs version 3.x.x?CptanPanic wrote: ↑Thu Oct 14, 2021 10:07 am So I found the newer version of script in official repo, and it does work correctly. https://github.com/ExpressLRS/ExpressLR ... c/ELRS.bas
- Tue Jan 03, 2023 11:13 pm
- Forum: Hardware
- Topic: Anyone identified a Stylus ??
- Replies: 4
- Views: 6651
Re: Anyone identified a Stylus ??
Probably the one with soft rubber tip?
- Tue Nov 01, 2022 2:30 pm
- Forum: FrSky Taranis radio
- Topic: Taranis X9D (2014) after update LCD is dead.
- Replies: 2
- Views: 3633
- Mon Oct 31, 2022 12:08 am
- Forum: FrSky Taranis radio
- Topic: 15v - 0.5a power supply
- Replies: 2
- Views: 2492
Re: 15v - 0.5a power supply
Ok, thx for your reply.
- Sun Oct 30, 2022 7:24 pm
- Forum: FrSky Taranis radio
- Topic: 15v - 0.5a power supply
- Replies: 2
- Views: 2492
15v - 0.5a power supply
Hi, i ordered a power supply for the taranis x9d+accst on T9 hobby uk and they sent me one with 15v, 0.5a, instead of a 13v, 0.5a.
Is it safe to use it to charge the stock battery?
Thx
Is it safe to use it to charge the stock battery?
Thx
- Mon Oct 24, 2022 7:06 pm
- Forum: ersky9xr
- Topic: Do you need scripts for crossfire module to work with 9xr pro?
- Replies: 5
- Views: 3074
Re: Do you need scripts for crossfire module to work with 9xr pro?
Hello all, I hope everyone is doing well. I'm not sure if I should have created a new topic? Sorry for all the questions, I just want to be sure about these things before spending any money. As far as I can see, the elrs module will work with the 9xr pro when erskytx is updated to the latest versio...
- Sun Sep 25, 2022 10:01 am
- Forum: er9x / gruvin9x / th9 based firmwares
- Topic: ersky tx 9xr-Pro revision 222 to revision 223
- Replies: 4
- Views: 8574
Re: ersky tx 9xr-Pro revision 222 to revision 223
Mike i have donated you 10£, so you can enjoy a warm cup of tea. Thx for your effort .
- Sat Aug 20, 2022 1:33 am
- Forum: erskyTx (was ersky9x)
- Topic: ERSKYTx (was ersky9x) Questions
- Replies: 2347
- Views: 1353331
Re: ERSKYTx (was ersky9x) Questions
Hi Mike, is there a possibility to
1 - add a swr/ras value reading somewhere in the radio menus and
2 - while using the multiprotocol module, a firmware version reading in the protocol selection page for the (and not only) Irangex IRX4+?
Thx.
1 - add a swr/ras value reading somewhere in the radio menus and
2 - while using the multiprotocol module, a firmware version reading in the protocol selection page for the (and not only) Irangex IRX4+?
Thx.
- Tue Jul 26, 2022 2:52 pm
- Forum: openTx
- Topic: X12S Internal GPS Lua question
- Replies: 2
- Views: 3524
Re: X12S Internal GPS Lua question
This is a great script, how's the development going?
cheers.
cheers.
- Mon Jul 25, 2022 6:28 pm
- Forum: 9Xtreme upgrade board
- Topic: Problem with last new Hobbyking Turnigy 9X transmiters.
- Replies: 189
- Views: 216593
Re: Problem with last new Hobbyking Turnigy 9X transmiters.
I dont know what have i done, but suddenly it started working fine. I copied that file to the firmware folder, but didnt flashed it, so i assume the 9xtreme flashed it.
- Mon Jul 25, 2022 12:28 am
- Forum: 9Xtreme upgrade board
- Topic: Problem with last new Hobbyking Turnigy 9X transmiters.
- Replies: 189
- Views: 216593
Re: Problem with last new Hobbyking Turnigy 9X transmiters.
Hi Mike, after watching closely, I realised that the situation is straight forward. What happens, is that the screen changes color several times and ends with a red light. Which probably means that it failed to flash. You probably noticed above. There is this user that says it is possible to flash w...
- Sun Jul 24, 2022 10:46 am
- Forum: 9Xtreme upgrade board
- Topic: Problem with last new Hobbyking Turnigy 9X transmiters.
- Replies: 189
- Views: 216593
Re: Problem with last new Hobbyking Turnigy 9X transmiters.
The first time, there a was sequence alright, but I don't remember what was because it was a bit fast. Then it went to the switch error screen. Now everytime I power on the radio, that screen shows up. Edit: Every time I unplug the battery and plug it again and turn on the radio, I see that the flas...
- Thu Jul 21, 2022 10:08 am
- Forum: 9Xtreme upgrade board
- Topic: Problem with last new Hobbyking Turnigy 9X transmiters.
- Replies: 189
- Views: 216593
Re: Problem with last new Hobbyking Turnigy 9X transmiters.
So I'm, for what I have read, there is no solution for this green chip 9x boards with the 9xtreme. I added this board, but this switch error shows up. at power on it seemed to flash the firmware, but then the error show on the screen. one can hear the welcome message though. https://openrcforums.com...
- Mon Jul 18, 2022 6:17 pm
- Forum: FrSky Taranis radio
- Topic: X9D+ ixjt module replacement with xht module
- Replies: 2
- Views: 2781
Re: X9D+ ixjt module replacement with xht module
Ok, so that means that it is possible to configure or chose options (d8, d16 or LR12) via the menu, replacing the dip switches?
- Sun Jul 17, 2022 4:53 pm
- Forum: FrSky Taranis radio
- Topic: Old Taranis 9xd Plus
- Replies: 5
- Views: 4471
Re: Old Taranis 9xd Plus
Actually you have 3 options to chose from:
ErskyTx v223;
Edgetx v2.7.1;
Opentx 2.3.15.
- Sun Jul 17, 2022 4:33 pm
- Forum: FrSky Taranis radio
- Topic: X9D+ ixjt module replacement with xht module
- Replies: 2
- Views: 2781
X9D+ ixjt module replacement with xht module
Hi all, with my x9d+ internal module gone bad, what's the chance of adding a frsky xht module and setting it up from the software? Is that possible?
Thx.
Thx.
- Thu Jul 14, 2022 6:41 pm
- Forum: FrSky Taranis radio
- Topic: RAS - SWR - VSWR
- Replies: 8
- Views: 6112
Re: RAS - SWR - VSWR
Hi, suddenly my taranis started sound antenna malfunction detected, or something like that, so I decided to swap the antenna, but the problem persisted. Lately I noticed that in lr12 and d16, the ras value, goes up to 80, which is terrible, I know, but in d8 mode it oscillates between 0 and 4, so it...
- Thu Jun 30, 2022 11:00 am
- Forum: FRSky Horus radio
- Topic: Horus X10S & X12S Custom Splash Screens
- Replies: 4
- Views: 6545
Re: Horus X10S & X12S Custom Splash Screens
Updates to splash screen library.