Search found 10467 matches

by Kilrah
Fri Jun 11, 2021 6:26 pm
Forum: er9x
Topic: Q: Frksy D16 , what Ardupilot data could I display on er9x screens?
Replies: 7
Views: 168

Re: Q: Frksy D16 , what Ardupilot data could I display on er9x screens?

R-XSR has both SBUS and S-Port, you connect those 2 to the FC. No need for F-Port.
by Kilrah
Thu Jun 10, 2021 8:33 pm
Forum: openTx
Topic: Jumper t16 trainer with futaba
Replies: 1
Views: 50

Re: Jumper t16 trainer with futaba

Are you aware that on the Futaba 6-pin trainer connector the input and output are on different pins so you need a cable wired differently for each?
by Kilrah
Mon Jun 07, 2021 10:42 am
Forum: General help (FrSky Taranis radio)
Topic: Not valid firmware file on TaranisX9D+ 2019
Replies: 1
Views: 282

Re: Not valid firmware file on TaranisX9D+ 2019

What's the exact name of the file you're trying to flash? Are you flashing it from the bootloader after having put it on the SD card?
by Kilrah
Fri May 28, 2021 11:06 pm
Forum: FrSky Taranis radio
Topic: Taranis x9e custom scripts page missing
Replies: 2
Views: 489

Re: Taranis x9e custom scripts page missing

You probably didn't flash firmware that has the lua option enabled.
by Kilrah
Wed May 19, 2021 11:11 am
Forum: General help (FrSky Taranis radio)
Topic: Q X7 does not power on
Replies: 3
Views: 792

Re: Q X7 does not power on

When the radio is connected to USB while powered off the screen doesn't show anything.
by Kilrah
Fri May 14, 2021 1:14 pm
Forum: FRSky Telemetry Mods
Topic: Rx telemetry output power options
Replies: 2
Views: 709

Re: Rx telemetry output power options

The standard 100mW.
by Kilrah
Sat May 08, 2021 9:53 pm
Forum: openTx for FrSky radios
Topic: Cant get up to date FW installed on a new Taranis X9D+
Replies: 2
Views: 669

Re: Cant get up to date FW installed on a new Taranis X9D+

Put the firmware file in the firmware directory on the sd then flash it from bootloader.
by Kilrah
Tue May 04, 2021 11:07 am
Forum: General RC Electronic Projects and Discussion
Topic: Unable to send signals from XJT Module to XM+ Receiver
Replies: 7
Views: 731

Re: Unable to send signals from XJT Module to XM+ Receiver

The module doesn't accept PPM on the label-side ports, only on the top pin of the 5-pin module connector.
by Kilrah
Mon May 03, 2021 1:52 pm
Forum: General help (FrSky Taranis radio)
Topic: RX8R binding only to ch1 to 8
Replies: 8
Views: 1223

Re: RX8R binding only to ch1 to 8

Possibly the multiprotocol module in your radio has too old firmware.
by Kilrah
Sun May 02, 2021 9:32 am
Forum: companion9x
Topic: Backup options not available Companion 2.3.11
Replies: 2
Views: 1111

Re: Backup options not available Companion 2.3.11

The backup option is only available for EEPROM-based radios (i.e. those without a color screen currently).

For the color screen ones you just backup the SD card contents since everything is stored there.
by Kilrah
Sat May 01, 2021 4:01 pm
Forum: General help (FrSky Taranis radio)
Topic: no sounds on sd taranis x9d+
Replies: 1
Views: 489

Re: no sounds on sd taranis x9d+

Make sure the audio language is set to one you have files for in radio settings.
by Kilrah
Fri Apr 30, 2021 5:33 pm
Forum: Hardware
Topic: Beta95x V3 --- Q X7 QUESTION / HELP ?
Replies: 2
Views: 578

Re: Beta95x V3 --- Q X7 QUESTION / HELP ?

That quad can be purchased with like 4 different preinstalled receiver options, are you sure you've got the FrSky one?
by Kilrah
Wed Apr 21, 2021 9:29 am
Forum: openTx
Topic: Help needed on X12s firware update to 2.3.11
Replies: 1
Views: 389

Re: Help needed on X12s firware update to 2.3.11

Your radio probably isn't in bootloader mode.
by Kilrah
Sat Apr 17, 2021 3:14 pm
Forum: General help (FrSky Taranis radio)
Topic: Tranais X90
Replies: 3
Views: 646

Re: Tranais X90

There's no "X90" but an "X9D", so I guess that's what you refer to.
It'll only talk to FrSky receivers out of the box but you can control Spektrum stuff if you add a multiprotocol module in the back slot and reflash the radio's firmware to add support for it.
by Kilrah
Thu Apr 15, 2021 10:25 pm
Forum: openTx
Topic: maybe a weird question...global countdown timer for tracking TX battery life?
Replies: 2
Views: 414

Re: maybe a weird question...global countdown timer for tracking TX battery life?

There is no countdown but there is a global count up timer in the statistics menu that you can reset when you charge.
by Kilrah
Thu Apr 15, 2021 8:09 pm
Forum: openTx
Topic: Question about endpoints in openTx
Replies: 1
Views: 381

Re: Question about endpoints in openTx

Correct.
by Kilrah
Tue Apr 13, 2021 6:26 pm
Forum: openTx
Topic: Old Turnigy 9X, ER9X to OpenTX?
Replies: 14
Views: 3590

Re: Old Turnigy 9X, ER9X to OpenTX?

by Kilrah
Tue Apr 13, 2021 6:23 pm
Forum: openTx
Topic: TX16S "auto detect format" on DSM?
Replies: 5
Views: 1246

Re: TX16S "auto detect format" on DSM?

The channel monitor doesn't know what the module does, it displays what the radio puts out, what happens afterwards is out of its purview.
Autodetect is about the module finding out from the receiver what DSM variant it needs to use to talk to it instead of you setting it manually.
by Kilrah
Mon Apr 12, 2021 9:14 pm
Forum: openTx
Topic: Old Turnigy 9X, ER9X to OpenTX?
Replies: 14
Views: 3590

Re: Old Turnigy 9X, ER9X to OpenTX?

It's right there in the downloads...
by Kilrah
Mon Apr 12, 2021 9:13 pm
Forum: openTx for FrSky radios
Topic: Access support for Horus X12S
Replies: 5
Views: 4423

Re: Access support for Horus X12S

Then your RX4R didn't actually get flashed.
by Kilrah
Mon Apr 12, 2021 9:11 pm
Forum: openTx
Topic: TX16S "auto detect format" on DSM?
Replies: 5
Views: 1246

Re: TX16S "auto detect format" on DSM?

The module does the pulse scaling unless you tick the checkbox that disables that. It's not related to autodetect.
by Kilrah
Thu Apr 08, 2021 4:40 pm
Forum: openTx
Topic: Old Turnigy 9X, ER9X to OpenTX?
Replies: 14
Views: 3590

Re: Old Turnigy 9X, ER9X to OpenTX?

Unclear what you want. You ask for OpenTX versions of which you have the latest already, but then mention er9x...
by Kilrah
Tue Apr 06, 2021 8:10 pm
Forum: FrSky Taranis radio
Topic: X9DP and X8R not binding
Replies: 1
Views: 605

Re: X9DP and X8R not binding

Have you flashed the radio's RF module with the version matching what you flashed on the receiver?
by Kilrah
Tue Apr 06, 2021 1:01 pm
Forum: Software
Topic: TX16S Yaw Issue in Simulator
Replies: 1
Views: 857

Re: TX16S Yaw Issue in Simulator

Check the channel monitor on the radio to see if it behaves correctly there or does the same as on Windows.
by Kilrah
Tue Apr 06, 2021 1:00 pm
Forum: er9x / gruvin9x / th9 based firmwares
Topic: 9xr and ppm
Replies: 1
Views: 1004

Re: 9xr and ppm

You can set OpenTX to put out 16 channels on the module port (top pin) and connect to that instead of the trainer jack.
by Kilrah
Sun Apr 04, 2021 3:55 pm
Forum: openTx
Topic: Switchless trainer mode?
Replies: 5
Views: 694

Re: Switchless trainer mode?

Don't have a reference at hand, but some people have definitely been setiting things up that way.
by Kilrah
Sat Apr 03, 2021 7:29 am
Forum: General help (FrSky Taranis radio)
Topic: Anyone got the FW 2.3.9 for the X9D Plus?
Replies: 1
Views: 483

Re: Anyone got the FW 2.3.9 for the X9D Plus?

OpenTX version would not affect bind.
If you have issues you probably flashed receivers or the radio's RF module without doing the other.

Go to advanced search