openrcforums

Thanks for your reply and help Kilrah.
My X12s is one of the first production batch after the beta programme.
The module firmware has been stable with no issues.
I will go ahead and upgrade to OpenTX 2.2.1.

Thanks for your reply Kilrah. My X12s was one of the first of the main production (not beta) and I immediately changed to OpenTX. I had read somewhere (and I cannot find the thread now) that there was an antennae warning problem with some radios when upgrading to 2.2.1 depending on which version of ...

My Horus X12s is currently running on OpenTX 2.2.0N362.
I would like to upgrade to OpenTX 2.2.1 but I have read somewhere there are problems with this upgrade.
Can anyone confirm if this upgrade is stable or not?
Thanks for any advice.

Thanks for the advice Kilrah.

I have an original Taranis (one of the first that came into the UK) and currently it is running on Opentx - r2940.
Can I change the firmware to the latest 2.2.1 directly or do I need to go through some intermediate steps?
Thanks for any advice.

Problem fixed!
Both X9D's are running on 3s Lipo's.
Changing to the stock 7.2 Nimh battery fixes the problem.
I guess that's why the Horus running the stock battery at 9.6V is OK.
Strange as the Bangood module quotes the operating voltage of 5-14V.
Thanks for your help.

Thanks for your reply Showmaster. More information below. My old Taranis X9D (one of the first batch into the UK) is on Opentx firmware r-2940. My newer Taranis X9D is on Opentx firmware 2.2.0. Neither of these transmitters has ever had a module fitted until I tried this multi module recently. Both ...

I seem to have a problem trying to operate any module in 2 Taranis transmitters. If I plug a multi protocol module or a DM9 Spectrum module into either of the 2 Taranis transmitters I have on powering up,the transmitters get stuck in a loop announcing welcome to open TX. If I plug either of the modu...

Hi After installing the Bangood multiprotocol module in the Taranis I get this strange behaviour. When switching on the Taranis gets stuck in a loop announcing welcome to open TX. After some time the Taranis then fires up correctly and I am able to use the module. Does anyone have any idea what the ...

Hi Taunu
He upgraded the voice pack and now the problem is fixed!
Thank you for your help - most appreciated!
Steve

My friend has a Taranis Plus and when it is connected to a vario it announces milliamps rather than feet or metres.
Has anyone else had this issue?
Thanks

Thanks jtaylor.
Had a chance this weekend to try again and your suggestion works.

I have converted my Taranis to Open TX 2.0.15 and loaded Open TX companion on to my desktop. Open TX companion has the model wizard working correctly but I can't seem to get it to work on the Taranis. I have followed the instructions on Scott Page's excellent video - downloaded the zip file, extract...

Great! Thanks Davx.
I will give it a try.
Steve

Thanks Davx - This update relates to the external XJT module. Is this the same update for the internal RF module on the Taranis?
Thanks
Steve

Thanks Rob.
I appreciate your help.
Steve

Hi Rob
Thanks for your reply.
I am currently running open tx-r2940 which I think was the last update before changing to Opentx 2.
Is this the firmware update you mean? If so do you recommend updating the internal RF module. Do you think this will fix the problem?
Steve

A friend and I are having problems with FRSKY variometers locking up whilst in use. We have updated the firmware on the varios and on our X8R receivers and still the varios lock and give the same altitude reading after about 30 second or so in the air. The strange thing is that I bench ran an update...

Davex - My Taranis is operating with the latest firmware but I have not updated the receivers. Will updating the receivers fix the problem. Dinamich - when I mention locking up I mean that the vario operates normally initially then reports the same height regardless of the altitude of the model. Tur...

I have a problem with varios locking up during flight. I am using a Taranis with an X8R receiver. I have this problem with both the standard precision and high precision varios. I have updated the firmware on the varios and still the problem persists. A friend I fly with also has the same problem. D...

Thanks for your reply Kilrah.
I haven't seen any Companion updates since the end of October.
I guess you guys are working on some big updates?
Steve

Will open TX automatically redirect us to new Taranis updates on GitHub or do will we have to log in to a different server to obtain updates?
Thanks
Steve

Can anyone help me add thermal and speed offsets to this Taranis EEEPE. This is the problem I have; I can couple flaps to ailerons using switch C but if I add a further mix say to a flap on CH5 then all flap and aileron surfaces work together regardless of where I put the additional mix with the fla...

I have always been able to bind my V8FRII receivers to my Taranis without using the bind plug on the RX.
Today I have noticed that the receivers will not bind without the bind plug being used.
Is this due to a firmware update?
Any suggestions?
Thanks
Steve

My operating system is Windows 8 but i'm not sure when the USB driver was updated.
Steve

Finally fixed the problem! For some reason my PC had updated the USB driver and this was the reason I could not see the Taranis SD card. I rolled back the driver to the previous one and the problem was fixed! Now I can see all files on the SD card and I can read and save eeproms. Thanks for your hel...

I am still having problems with the Taranis. I am unable to read or write any EPROMs.
Companion 9X software is not able to see the Taranis TX as my previous post.
TX is switched on before attaching the USB cable.
Any suggestions would be most welcome.
Steve

Can anyone help. When I connect my Taranis to the PC (Taranis turned on) I get the error message 'Taranis radio not found. Impossible to identify the radio on your system, please verify the eeprom disc is connected'. I have reloaded the latest version of the firmware (1.34) twice and still get the s...