openrcforums

Just got to get used to the menu systems now. Having a problem setting up for acro mode for my quadcopter...hmmmm.

Wasn't any of the above. The ribbon cable between the programmerand the 9X was the best part of 900mm long, cut it down really small...flashed first time. Thanks Rob for the PM advice, worked a treat. Concluding, If any one has a similar problem first check: Soldered pads on 9X chassis, ensure their...

Settings i've used from the start.

Just tried using the olde faithful kk flassh tool that is good for everything and has the same error: Flash the firmware file. Z:\Quadcopter FC board\KK flashing\Flash tool 0.70 stable\lib\avrdude\windows\avrdude.exe -C Z:\Quadcopter FC board\KK flashing\Flash tool 0.70 stable\lib\avrdude\windows\av...

tried slowing it down and using the slowest setting still no joy. I've ordered a new programmer even if i use it to flash the old one it will be handy to have two.
Thanks for your help all...I'll wait untill the new programmer arrives. Post any update as they happen, thanks again.

Look at the images above and the information given already...If you see any problems then point them out so they can be corrected... Yes...checked, checked again and rechecked. I'm not new to flashing firmware, using arduino and KK flash tool for ESCs and Flight control boards, nor am i new to elect...

The orange thing is a 47mF cap, suggested to be removed from the reset line on another topic regarding flashing. With or without it it doesn't make a difference. It's now been reattached.
On the v1 9x chassis it was black.

V2 9x chassis, the jumper on the programmer enables power to what ever its plugged into.

pin1 brown Mosi.
pin2 red vcc
pin3 not connected nc
pin4 not connected gnd
pin5 green reset
pin6 not connected gnd
pin7 purple sck
pin8 not connected gnd
pin9 white miso
pin10 black gnd

programmer is powering the radio, connections are correct.
The radio bleeps and screen flashes when i click YES to flash fw.

Having problems with flashing my v2 9x. Using: USBasp programmer from HK. eepe. Circuit wires: http://i1300.photobucket.com/albums/ag83/rockcrawlerpics/IMG_8072_zps30fbbef2.jpg USBasp: http://i1300.photobucket.com/albums/ag83/rockcrawlerpics/IMG_8070_zps7ac758dc.jpg Getting this error: http://i1300....