Search found 5 matches
- Mon Feb 18, 2013 12:04 am
- Forum: PROGRAMMERS
- Topic: WARNING: Known problematic USBASP
- Replies: 60
- Views: 128687
Re: WARNING: Known problematic USBASP
I have that one also It work fine till I tried to update the firmware. I think I erased the Eprom which now reads all FF's I am waiting on a new programer to read the software and re-flash it. I think I have to change the fuses for the external clock to program. Advise if anyone has these flash file...
- Sun Feb 17, 2013 11:18 pm
- Forum: General Information & Rules
- Topic: Back lighting reversed funtions
- Replies: 6
- Views: 7400
Re: Back lighting reversed funtions
I loaded the latest ver of open 9x and the back lighting works fine but there is something different in the radios main boards the voltage at pin 17 on the cpu the input to the transitor were oppisite with the same command and the same ver of the software. I also loaded open 9x on a friend's radio a...
- Wed Feb 13, 2013 10:08 pm
- Forum: General Information & Rules
- Topic: Back lighting reversed funtions
- Replies: 6
- Views: 7400
Re: Back lighting reversed funtions
I see the menu in the general setting for ! (not) to reverse the fuctions but no ! (not) on the stick or switch timers. My timer if set for 5 seconds will be off for 5 second then on till a switch is pressed or stick moved. I measured the on voltage at 3.45 volts and the off volts at .55 volts. on r...
- Wed Feb 13, 2013 1:08 pm
- Forum: General Information & Rules
- Topic: Back lighting reversed funtions
- Replies: 6
- Views: 7400
Re: Back lighting reversed funtions
Hard wired. Where is system preference located?
- Wed Feb 13, 2013 11:11 am
- Forum: General Information & Rules
- Topic: Back lighting reversed funtions
- Replies: 6
- Views: 7400
Back lighting reversed funtions
I have installed several Hobby King backlight pannel following Richard Mrazek video all work fine on various Turnigy and Fly Sky th9x Radios using the BS 170 transitor. On the last Turnigy th9x I modified all the back light fuctions are revesed. Example set time on for 5 seconds from eirther switchs...