openrcforums

Hi! Recently I've swapped my Walkera 8S (DeviationTX) for a Jumper T16 (OpenTX) and I can't translate the Nihui U807 model to the new system....I've managed to rebuild the airplane modesl only.... I've attached the model.ini file to the post (Could be viewed with a TXT editor) Any help? Could some o...

Hi !

Thanks for the info, I don't noticed that the mix was only working for the ID0 mode Now I've changed it into the correct position
I'm on r788 , I'm gonna change the throttle from 125 to 100 also to get the full throttle at the end of the stick

Cheers

Ok, thanks for the info

Hi, this its my setup.... CH01 (+100%)Ail * (+100%)CH06 CH02 (+100%)Ele * (+100%)CH06 CH03 (+125%)Thr Switch(ID0) Curve(Curve 1) (+10%)Ele Switch(ELE) R (+125%)Thr Switch(!ID0) Curve(Curve 2) R (-100%)MAX Switch(THR) CH04 (+100%)Rud * (+100%)CH05 CH05 R (+50%)P1 Offset (100%) CH06 R (+50%)P3 Offset ...

Hi, I've made a model profile for a 4Ch Helicopter (V911) and I've noticed that when the heli goes forward its needs a bit more throttle 'cause the main rotor speed goes down a bit, I've red that its normal so to compensate the effect I've added a mix to the channel 3 (TRH), when I press the ELV Swi...

Hi, looking into the radiuo setup menus of my 9x I cant find the Filter option... Has been removed? I'm using the r788...

Thanks in advance.

Hi !


Thanks for your inputs

The problem was in the protocol...now using PPMSIM works like a charm.

Thanks again for your help

Hi ! I've sucesfully binded my FBL100 with my 9x using the HT8 module from Hisky, but I need to remove the 9x radio module everytime i want to plug the HT8...otherwise the HT8 doesn't works.... I've used the PPMSIM option in the radio setup but doesn't works.... Any ideas? BTW I've not done the resi...

Hi, I've download this template and want to know if the P2 works as the mode 1/2 button on the original radio.

Thanks in advance.

Hi, thanks for the info. I'll try using the PPMSIM option in the model setup.

Hi, I've a friend who wants to start flying an Ezstar. Hi has bought a 9x radio like mine and need to know if I can use my radio as master using a 3.5mm cable conected to his radio. I've seen that it's not necesary to modify the radio with the 1k resistor since I can set the output to PPMSIM but I n...

Uuuuuupppps

I've discovered the way.... I gonna post the solution here 'cause could be usefull for another member...

Just open the 2 files and pick the model you want to copy and drag on your existing model window....

Hi there ! I've my eprom models file with all my Planes models but now I want to include another model (an Heli) from a file who a pal sent me by email. Could be possible to merge 2 files? I dont know if its possible, just wondering if i can "bypass" the process of copying the heli setting...

Yeah, I took a look before the take off and was clear but sudenly a bush was in the middle !!!! :lol: It's the price i have to pay 'cause I'm a newbie :D Thanks for the imputs, I've check the instructions of gohsthb and works like a charm !!! Now it's time to check it on the fly field....hope not to...

Hi again, I managed to set up the radio :) thanks to jhsa and Romolo. I prepared the 9x for my little P47 Thunderbolt and it was fine until a bush appeared in my way and the little bird crashed against the ground :lol: http://imageshack.us/a/img850/228/img20130216103340.jpg But now it's fixed and re...

Hey !!! thanks for your help ! :) Everything its working now !!!!! Don't blame on me.... after checking all of your inputs and setting the radio as you told me I've realized that I've not calibrated the radio...... :lol: You're right , the better way to learn its going to the fields and asking peopl...

Hi :) I came from another type of radio (FlySky 6b) and need to set up a template for my Easy Star... I've tried to make by myself but can't get to put all in working order.... I need to prgramm the radio to get... If I move the AIL stick in one direcction one of the ailerons must go down and the ot...

Thanks !!! Now working

Hi

I used the Hobbyking connection, no FET connected to pin 17....Just using the HK connector... ¿?

http://www.hobbyking.com/hobbyking/stor ... LCD-BL.jpg

Thanks in advance.

Hi, I'm a newbie and I've progrramed my radio to switch the light on and off using the AIL switch but it doesnt works. I've installed the HobbyKing LCD backlinght.....

Any ideas?.

Thanks in advance.

Rob Thomson wrote:Check the custom functions. There is an instant trim function.

Thnx done

jhsa wrote:

solmer wrote:Thanks !!!! Vielen Dank

I live in Germany pero soy portugues..

Sorry, sooo Obrigado We're neighbours

BTW.... I know this its not the correct forum to ask about the open9x but....does anybody knows how to trim a plane just using one of the switchs? I've read in another forum (I dont remember where) about trimming an airplane just trimming it and then pressing / activating one of the switch... Thanks...

Thanks !!!! Vielen Dank

:D :D :D :D :D :D Belive it or not....It's working again !!!!!! Tried the oscillator method.....X doesn't works.... :? Re-check wires....................X doesn't works... :? Removed Atmega64 and replaced with a new one.... WORKS!!!!! :lol: It was a bit hard since I don't have the proper tools so I'...

Hi, my progresssssss today I'm gonna get the 1Mhz oscillator, went last Monday but the sales man told me they run out of stock. I'll post the result tomorrow, anyway I've got a new Attmega64 to replace in case the 1Mhz doesnt works....

Stay tuned

Hi, the orange wire (SCK) its soldered to the 6th resistor from the right, so I think its corrent, isn't it?

a picture with the sold. point... The circle its where the SCK its soldered, the red X its the wrong pad...

Rob Thomson wrote:How long are your leads from the board to the USBasp device?

Believe you should keep these as short as possible.

Hi, I think they are short enought 7cm...

Your board is a so called version1 with the pad of the orange wire in the wrong place. Orange wire must be connected to the 6th processor pin from rigth side Reinhard Hi, yes its a V1 ant the orange wire goes to 6th pin from the right, the picture its not so clear but I've checked it and the connec...

Good morning :) Here are the pics from my mainboard, I've got it with my cellular, but I think they are clear enough to see the wires.... http://imageshack.us/a/img801/8108/img20121119092933.jpg http://imageshack.us/a/img593/1852/img20121119092849.jpg I've re-checked the connections again and everyt...